PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 9W-5828 TRACK SHOES FROM DEALER PARTS STOCK
Usage:
REBE2873-00
Show/hide table
| 07Nov2007 |
U-564
A-461
D-459
O-491
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 9W-5828 TRACK SHOES FROM DEALER PARTS STOCK |
|
| 4172 | PI70243 |
|
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 29Feb2008 |
PROBLEM
Show/hide table
| During a period from November, 2006 through April, 2007 a limited number of 9W-5828 track shoes were manufactured with the mounting holes not drilled in the proper location. These holes are out of location by only a small amount which will not allow the mounting bolts to align with the corresponding holes in the track links. |
ACTION REQUIRED
Show/hide table
| Inspect all 9W-5828 Track Shoes in Dealer parts stock. Remove all track shoes that have the mounting holes drilled incorrectly from Dealer Parts Stock. NOTE: The dimensional differences between the defective shoes and the correct shoes are too small and too difficult to measure (without a CMM). The best method to use to detect a defective shoe is to perform a fitup test with the correct link assembly. The proper track bolts should fit without forcing. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
| The following time will be allowed for track shoe inspection. Description__________________Hours Jig/Fixture setup___________0.5 hours Each shoe inspected_________0.2 hours Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REROUTING AND REPLACING THE ALTERNATOR CABLE IF NEEDED ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING REAR CRANKSHAFT COUNTERWEIGHT BOLTS IN 3508B ENGINES USED IN 992G, 854G, AND 777D MACHINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING REAR CRANKSHAFT COUNTERWEIGHT BOLTS IN 3508B ENGINES USED IN 992G, 854G, AND 777D MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REWORKING CERTAIN 992G TILT CYLINDERS AND 994F LIFT CYLINDERS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REWORKING CERTAIN 992G TILT CYLINDERS AND 994F LIFT CYLINDERS IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING LOADER LINKAGE CARTRIDGE RETENTION SYSTEM ON CERTAIN 992G WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING LOADER LINKAGE CARTRIDGE RETENTION SYSTEM ON CERTAIN 992G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFT CYLINDERS HOSES AND TUBES ON CERTAIN 966H AND 972H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE LIFT CYLINDERS HOSES AND TUBES ON CERTAIN 966H AND 972H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CARRIER BEARINGS ON CERTAIN 966H AND 972H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CARRIER BEARINGS ON CERTAIN 966H AND 972H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC SLAVE ELECTRONIC CONTROL MODULE (ECM) WHICH MAY FAIL ON CERTAIN D6K XL, D6K LPG TRACK-TYPE TRACTORS, 953D, AND 963D TRACK-TYPE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC SLAVE ELECTRONIC CONTROL MODULE (ECM) WHICH MAY FAIL ON CERTAIN D6K XL, D6K LPG TRACK-TYPE TRACTORS, 953D, AND 963D TRACK-TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND/OR REPLACING THE 8 118-9573 BOLTS FOR THE BEARING RETAINER ON CERTAIN D6N SERIES III XL AND D6N SERIES III LGP TRACK-TYPE TRACTORS THAT ARE EQUIPPED WITH A VPAT DOZER PRODUCT SUPPORT PROGRAM FOR INSPECTING AND/OR REPLACING THE 8 118-9573 BOLTS FOR THE BEARING RETAINER ON CERTAIN D6N SERIES III XL AND D6N SERIES III LGP TRACK-TYPE TRACTORS THAT ARE EQUIPPED WITH A VPAT DOZER
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT DIFFERNTIAL ON CERTAIN 906 AND 908 COMPACT WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT DIFFERNTIAL ON CERTAIN 906 AND 908 COMPACT WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTRAL BLADE LASER SUPPORT THAT MAY INTERFERE WITH THE C FRAME FRONT TOWER ON CERTAIN D6N LGP TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTRAL BLADE LASER SUPPORT THAT MAY INTERFERE WITH THE C FRAME FRONT TOWER ON CERTAIN D6N LGP TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUCTION PIPE ON CERTAIN SMALL WHEEL LOADERS, VIBRATORY SOIL COMPACTORS, AND 3056 AND 3056E INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUCTION PIPE ON CERTAIN SMALL WHEEL LOADERS, VIBRATORY SOIL COMPACTORS, AND 3056 AND 3056E INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SCRAPER ENGINE MUFFLER ASSEMBLY MOUNTING HARDWARE ON CERTAIN 657G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SCRAPER ENGINE MUFFLER ASSEMBLY MOUNTING HARDWARE ON CERTAIN 657G WHEEL TRACTOR SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 3E-5239 RELAY ON CERTAIN 924G, 928G, AND 930G WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 3E-5239 RELAY ON CERTAIN 924G, 928G, AND 930G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOOD SUPPORT ON 631G AND 637G TIER III WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT HOOD SUPPORT ON 631G AND 637G TIER III WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONDENSER MOTORS ON VARIOUS D6, D7, D8, D9, D10, AND D11 TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE CONDENSER MOTORS ON VARIOUS D6, D7, D8, D9, D10, AND D11 TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR LINKAGE AND GUARDING ON CERTAIN 950H, 962H, 966H, 972H, AND 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT SENSOR LINKAGE AND GUARDING ON CERTAIN 950H, 962H, 966H, 972H, AND 980H WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE WELD AROUND THE DOZER BLADE BRACKET ON CERTAIN D6N XL AND LGP TRACK-TYPE TRACTORS EQUIPPED WITH A VPAT DOZER PRODUCT SUPPORT PROGRAM FOR REWORKING THE WELD AROUND THE DOZER BLADE BRACKET ON CERTAIN D6N XL AND LGP TRACK-TYPE TRACTORS EQUIPPED WITH A VPAT DOZER
PRODUCT SUPPORT PROGRAM FOR INSTALLING CAB AND AIR CONDITIONER BARRIERS ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS PRODUCT SUPPORT PROGRAM FOR INSTALLING CAB AND AIR CONDITIONER BARRIERS ON CERTAIN 621G, 623G, AND 627G WHEEL TRACTOR SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS AT THE APRON TRUNION JOINTS ON CERTAIN 621G, 627G, 631G, AND 637G WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS AT THE APRON TRUNION JOINTS ON CERTAIN 621G, 627G, 631G, AND 637G WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROLLER ASSEMBLY ON CERTAIN 615C AND 623G WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ROLLER ASSEMBLY ON CERTAIN 615C AND 623G WHEEL TRACTOR-SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE COOLING PACKAGE AND ADJUSTING THE HYDRAULIC FAN SYSTEM ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDLING OR WOODCHIP ARRANGEMENTS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE COOLING PACKAGE AND ADJUSTING THE HYDRAULIC FAN SYSTEM ON CERTAIN D8T AND D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDLING OR WOODCHIP ARRANGEMENTS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ANGLE CYLINDERS ON CERTAIN D6N TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ANGLE CYLINDERS ON CERTAIN D6N TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REMOVING THE 308-0947 OIL LEVEL GAUGE AS. (DIPSTICK) FOR CERTAIN 950H, 962H WHEEL LOADERS, AND IT62H INTEGRATED TOOL CARRIERS PRODUCT SUPPORT PROGRAM FOR REMOVING THE 308-0947 OIL LEVEL GAUGE AS. (DIPSTICK) FOR CERTAIN 950H, 962H WHEEL LOADERS, AND IT62H INTEGRATED TOOL CARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PUMP CONTROL VALVE ON CERTAIN D8T, D9T, AND D10T TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE FAN PUMP CONTROL VALVE ON CERTAIN D8T, D9T, AND D10T TRACK-TYPE TRACTORS