- Excavator:
- 330D (S/N: NBD1-UP; MWP1-UP; EDX1-UP)
- 336D (S/N: W3K1-UP)
- Work Tool:
- HYDRAULIC KIT (S/N: HKB1-UP)
Introduction
This Special Instruction is organized into modules. Caterpillar suggests installing one module at a time.
Note: Drain the hydraulic fluid from the hydraulic tank before opening the hydraulic system. Remember to fill the hydraulic tank with hydraulic fluid once the installation is complete.
Required Parts
460-5488 Coupler Control Arrangement Revision - 00     | ||
---|---|---|
Part Number     | Description     | Media Number     |
238-1565     | Quick Coupler Wiring Gp     | GEHS0797     |
238-2485     | Toggle Switch Gp     | GEHS0787     |
445-2020     | Auxiliary Lines Gp     | GEHS0618     |
448-3380     | Film Gp     | -     |
453-2322     | Front Lines Gp     | GEHS0840     |
Installation
The 460-5488 Coupler Control Arrangement is divided into several modules. Each module has a Special Instruction associated to the module. Use these Special Instructions to complete the installation of the Control Ar.
Set the machine tool control system.
ReferenceExcavator Tool Control System, RENR7389, "Testing and Adjusting Section", "Process for Setting Up the Work Tool"
Principles of Operation
ReferenceExcavator Tool Control System, RENR7389, "Systems Operation Section", "General Information"
Serial Number Identification
Caterpillar Work Tools hydraulic kits are identified with serial numbers. The serial number is printed on a film group (1). This film group should be placed on the right-hand window inside the cab.
Illustration 1 | g01742203 |
Serial Number Plate |
Illustration 2 | g02240415 |
(1) 448-3380 Film Gp |