Specifications
本機器的預設使用方式為搭配鏟斗進行挖掘或搭配經過認證的作業機具進行作業。 因為此機器的上部結構配備固定設備後,一般可進行 360 度旋轉,所以此機器應搭配底座並架設在靜止位置上進行操作。 此機器可用以進行重量低於機器舉升能力的物件之裝載作業。 機器用以裝載物件時,務必正確配置機器並適當地進行操作。 請遵循當地政府與地方政府的法規。 僅能使用經過認證的舉升裝置,從經過認可的位置舉升物體。
本機器的可用壽命取決於許多因素,包括機器擁有者將機器改造為出廠規格的意願。 請洽詢 Cat 代理商,以便協助您計算確定機器可用壽命所需的整體擁有和作業成本。 要獲得本機器的經濟可用壽命,需要以下項目:
- 按操作與保養手冊中所述執行定期預防性保養程序。
- 按操作與保養手冊中所述執行機器檢查,並糾正所發現的任何問題。
- 按操作與保養手冊中所述執行系統測試,並糾正所發現的任何問題。
- 確保機器使用條件符合 Caterpillar 所建議的條件。
- 確保工作重量不超過製造商所設定的限制。
- 確保所有機架裂縫得到識別、檢查和維修,以防其進一步發展。
Show/hide table
插圖 1 | g01327231 |
Show/hide table
312D2 和 313D2 | ||||
延伸動臂
4.65 m 15'3" |
HD (Heavy Duty,重載) 動臂
4.65m 15'3" |
延伸動臂
4.65 m 15'3" |
||
|
|
|
|
|
最大挖掘深度 (1) | |
|
5,580 mm
18'3" |
|
在地面高度 (2) 時的最大伸出距離 | |
|
8210 mm
26'9" |
|
最大切割高度 (3) | |
|
8510 mm
27'9" |
|
最大負載高度 (4) | |
|
6060 mm
19'9" |
|
最小負載高度 (5) | |
|
1980 mm
6'5" |
|
最大切割深度 (6)(1) | |
|
5370 mm
17'6" |
5340 mm
17'5" |
最大挖掘深度 (直牆) (7) | |
|
5050 mm
16'5" |
4910 mm
16'1" |
鏟斗 | ||||
型式 | GD (General Duty,一般負載) | GD (General Duty,一般負載) | SD (Severe Duty,超重載) | UD (Utility Duty,輕型) |
零件編號 | 358-8616 | 358-8616 | 358-4486 | 394-1691 |
功能 | 0.53 | 0.53 | 0.63 | 0.53 |
齒端半徑 | 1200 | 1200 | 1250 | 1200 |
Show/hide table
(1) | |
Show/hide table
插圖 2 | g00762567 |
Show/hide table
312D2 與 313D2 挖掘機(1) | ||
---|---|---|
|
|
|
概略重量 | |
|
全長 (A) | |
|
總高度 (B) | |
|
駕駛室高度 (C) | |
|
全寬 (D) | |
|
履帶板寬度 (E) | |
|
上部結構寬度 (F) | |
|
Show/hide table
(1) | 這些規格適用於具有一個 |
Show/hide table
312D2 L 和 313D2 L 挖掘機(1) | ||
---|---|---|
|
|
|
概略重量 | |
|
全長 (A) | |
|
總高度 (B) | |
|
駕駛室高度 (C) | |
|
全寬 (D) | |
|
履帶板寬度 (E) | |
|
上部結構寬度 (F) | |
|
Show/hide table
(1) | 這些規格適用於具有一個 |
Show/hide table
312D2 GC 和 313D2 GC 挖掘機(1) | ||
---|---|---|
|
|
|
概略重量 | |
12230 kg
26963 lb |
全長 (A) | |
|
總高度 (B) | |
|
駕駛室高度 (C) | |
|
全寬 (D) | |
|
履帶板寬度 (E) | |
|
上部結構寬度 (F) | |
|
Show/hide table
(1) | 這些規格適用於具有一個 |
Caterpillar Information System:
312D2 and 313D2 Excavators Hydraulic System Boom Hydraulic System
312D2 and 313D2 Excavators Hydraulic System Main Hydraulic System
311B and 312B Excavators Hydraulic System Swing Bearing Movement - Measure
307C Excavator Hydraulic System Swing Bearing Movement - Measure
318E Excavator C4.4 Engine Supplement Turbocharger - Remove and Install
336E H Excavator Relay - Test
730C2 and 725C2 Articulated Truck Power Train Transmission Planetary - Assemble
349F and 352F Excavator Machine System Electrical Connector - Inspect
730C2 and 725C2 Articulated Truck Power Train Transmission Planetary - Disassemble
336E H Excavator Alarm - Test
349F and 352F Excavator Machine System Emerging Symptom Information
349F and 352F Excavator Machine System Symptom Troubleshooting
312D2 and 313D2 Excavators Hydraulic System Electronic Control System
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547} Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
336E Excavator Machine System Specifications Pilot Lines
312F, 313F, 316F and 318F Excavators Wiring Harness (Short Circuit) - Test
Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451} Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451}
336E Excavator Machine System Specifications Front Lines
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Pilot Lines
336F and 340F Excavators Machine System Boom System
318E Excavator C4.4 Engine Supplement Fuel Manifold - Remove and Install