Turbocharger - Remove and Install
Removal Procedure
- Open engine hood (1) .
Show/hide table
Illustration 1 | g02734877 |
- Disconnect tube assemblies (2) .
Show/hide table
Illustration 2 | g02775176 |
- Remove tube assemblies (4) and (7). Remove nuts (3) and (5). Loosen clamp (6) if necessary.
Show/hide table
Illustration 3 | g02775177 |
- Remove turbocharger (8) .
Installation Procedure
- Install turbocharger (8) in the reverse order of removal.
- Tighten nuts (5) to a torque of 44 N·m (32.5 lb ft).
- Tighten clamp (6) to a torque of 12 N·m (106 lb in).
Caterpillar Information System:
336E H Excavator Relay - Test
730C2 and 725C2 Articulated Truck Power Train Transmission Planetary - Assemble
349F and 352F Excavator Machine System Electrical Connector - Inspect
730C2 and 725C2 Articulated Truck Power Train Transmission Planetary - Disassemble
336E H Excavator Alarm - Test
349F and 352F Excavator Machine System Emerging Symptom Information
349F and 352F Excavator Machine System Symptom Troubleshooting
318D2 Excavator Lubricant Viscosities - Fluids Recommendations
349F and 352F Excavators Determining Diagnostic Trouble Codes
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Diagnostic Capabilities
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Service Tools
318E Excavator C4.4 Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
307C Excavator Hydraulic System Swing Bearing Movement - Measure
311B and 312B Excavators Hydraulic System Swing Bearing Movement - Measure
312D2 and 313D2 Excavators Hydraulic System Main Hydraulic System
312D2 and 313D2 Excavators Hydraulic System Boom Hydraulic System
312D2 and 313D2 Excavators Specifications
312D2 and 313D2 Excavators Hydraulic System Electronic Control System
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547} Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
336E Excavator Machine System Specifications Pilot Lines
312F, 313F, 316F and 318F Excavators Wiring Harness (Short Circuit) - Test
Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451} Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451}
336E Excavator Machine System Specifications Front Lines
336E Excavator Machine System Specifications Pilot Lines