336E Excavator Machine System Specifications Caterpillar


Pilot Lines

Usage:

336E L BZY


Illustration 1g03156064
Top view

Table 1
Specification for 381-2166 Pilot Lines Gp 
Item  Qty  Part  Specification Description 
7K-1181 Cable Strap  Sharp corners at the cutting edge of each cable strap shall not be allowed. 
148-8378 Elbow As  Torque to 29 ± 3 N·m (257 ± 27 lb in)


Illustration 2g03156063
Bottom view (Main control valve)
With lift mode

Table 2
Item  Qty  Part  Specification Description 
148-8435 Tee As  In case of aluminum manifold tighten to 24 ± 2 N·m (212 ± 18 lb in)


Illustration 3g03156076
Bottom view (Main control valve)
Without lift mode

Table 3
Item  Qty  Part  Specification Description 
In case of aluminum manifold tighten fitting to 24 ± 2 N·m (212 ± 18 lb in)

Caterpillar Information System:

336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Pilot Lines
336E Excavator Machine System Specifications Front Lines
Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451} Installation of the Generator and Control Panel Components for Dynamic Gas Blending Retrofits on Certain 3500 Engines{4490, 7451}
312F, 313F, 316F and 318F Excavators Wiring Harness (Short Circuit) - Test
336E Excavator Machine System Specifications Pilot Lines
Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547} Procedure to Install the 380-3967 Connecting Lines Gp (Thumb) on Certain Hydraulic Excavators{5057, 5362, 6547}
312D2 and 313D2 Excavators Hydraulic System Electronic Control System
312D2 and 313D2 Excavators Specifications
312D2 and 313D2 Excavators Hydraulic System Boom Hydraulic System
312D2 and 313D2 Excavators Hydraulic System Main Hydraulic System
336F and 340F Excavators Machine System Boom System
318E Excavator C4.4 Engine Supplement Fuel Manifold - Remove and Install
318E Excavator C4.4 Engine Supplement Diesel Particulate Filter - Remove and Install
318E Excavator C4.4 Engine Supplement Soot Antenna - Remove and Install
318E Excavator C4.4 Engine Supplement Soot Sensor - Remove and Install
318E Excavator C4.4 Engine Supplement Temperature Sensor (DPF) - Remove and Install
336E Excavator Machine System Specifications Front Lines
336E Excavator Machine System Specifications Front Lines
Flywheel Housing Salvage for Excavator C18 Engines {0677, 1157} Flywheel Housing Salvage for Excavator C18 Engines {0677, 1157}
318E Excavator C4.4 Engine Supplement Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
318E Excavator C4.4 Engine Supplement Exhaust Elbow - Remove and Install
318E Excavator C4.4 Engine Supplement Clean Emissions Module - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.