A Previous High Temperature Locknut is Used in Engine Exhaust System Groups {7553}
- Caterpillar Products:
- 3500 Family Generator Sets and Power Modules
- G3500 Family Generator Sets and Power Modules
- Engine: Commercial
- 3500 Family All
- G3500 Family All
Description of Change: The current high temperature locknut is being replaced by the locknut that was previously used. The previous locknut is more resistant to becoming deformed or loose under extreme heat. The locknut is used in parts groups that are related to the exhaust system on the 3500 and 3500B Engines. The locknut is used in the engines that are listed above.
Adaptable To: The 2N-2766 Locknut is a direct replacement for the 168-7800 Locknut in following parts groups:
- Air lines groups
- Exhaust bypass groups
- Exhaust manifold groups
- Turbocharger groups
Caterpillar Information System:
SW45 and SW60 Wheel Saws Check Valve - Remove and Install
321C LCR Excavator Machine Systems Cab - Install
321C LCR Excavator Machine Systems Cab - Remove
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458} Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
SW45 and SW60 Wheel Saws Frame (Rear) - Remove and Install
321C LCR Excavator Machine Systems Swivel - Install
321C LCR Excavator Machine Systems Swivel - Remove
2003/10/01 An Improved Alternator Belt is Used {1357}
2003/09/15 An Improved Alternator Belt is Used {1357}
M325D MH Material Handler Window Washer Reservoir - Fill
315C Excavator Machine Systems Boom Cylinder - Remove and Install
345B Excavator Hydraulic System Counterweight (Removal and Installation Hydraulic System)
321C LCR Excavator Machine Systems Undercarriage Frame - Remove
321C LCR Excavator Machine Systems Undercarriage Frame - Install
2003/11/24 Remanufactured Improved Travel Motors With Increased Service Life Are Now Available {5058}
SW45 and SW60 Wheel Saws Hydraulic Cylinder (Depth) - Remove and Install
G310B, G315B and G320B Demolition and Sorting Grapples Hydraulic Cylinder - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Crankshaft - Remove
Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631} Standalone Installation of the Machine Security System (MSS) Medium Excavator{7631}
2003/08/18 New Software is Available for the M300C Wheeled Excavators {7601, 7620}
SW45 and SW60 Wheel Saws Piston Motor - Remove
SW45 and SW60 Wheel Saws Piston Motor - Install
2003/08/18 New Software is Available for the M300C Wheeled Excavators {7610, 7620}
2003/09/01 New Engine Software is Available for the M300C Wheeled Excavators {1902, 7620}