Bucket Cylinder
Show/hide table
Illustration 1 | g03318209 |
Show/hide table
Specification for 198-7213 Bucket Cylinder Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 10     | 3E-6910 Bolt     | Torque to 130 ± 20 N·m (96 ± 15 lb ft).     |
2     | 2     | 117-9435 Bushing     | Bore before assembly is 60.18 ± 0.02 mm (2.369 ± 0.001 inch).     |
Installation depth is 7.5 ± 0.3 mm (0.30 ± 0.01 inch). |
|||
A     | 1     | 198-7218 Cylinder As     | Bore is 88.90 ± 0.25 mm (3.500 ± 0.010 inch).     |
B     | 1     | 296-3274 Cylinder Rod and Bearing As     | Diameter is 64.93 ± 0.03 mm (2.556 ± 0.001 inch).     |
C     | 1     | 121-1994 Head     | Bore over two lands is 65.53 ± 0.03 mm (2.580 ± 0.001 inch).     |
3     | 1     | 143-8149 Special Locknut     | Before assembly, apply 309-6932 Hydraulic Oil to the face and threads.     |
Torque to 2800 ± 140 N·m (2065 ± 103 lb ft). |
|||
4     | 1     | 099-6976 Ring     | Lubricate the inside diameter and the outside diameter with clean grease.     |
5     | 1     | 099-6973 Seal As     | Lubricate the inside diameter and the outside diameter with clean grease.     |
6     | 1     | 105-2630 Ring     | Lubricate the inside diameter and the outside diameter with clean grease.     |
7     | 1     | 121-1997 Seal Ring     | Slit of ring must turn in direction of piston.     |
8     | 1     | 114-0754 Bushing     | Outer diameter is 70.120 ± 0.025 mm (2.7606 ± 0.0010 inch).     |
Thickness is 2.470 ± 0.025 mm (0.0972 ± 0.0010 inch). |
|||
9     | 1     | 170-9840 Buffer Seal     | Lubricate lightly with lubricant that is being sealed.     |
10     | 1     | 170-9856 U-Cup Seal     | Lubricate lightly with lubricant that is being sealed.     |
11     | 1     | 165-9282 Lip Type Seal     | Lubricate lightly with lubricant that is being sealed.     |
Before assembly, apply green loctite 609 or loctite 601 to the wiper seal groove. |
Caterpillar Information System:
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Remove
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Install
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Assemble
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Control Manifold - Disassemble
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Check Valve - Remove and Install
M312 Excavator Machine System Wheel Group
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Blade - Remove and Install
2003/04/14 Use 216-3914 Track Repair Group to Assemble and Disassemble the Track Assemblies {4170}
3412 Generator Set Engines Disconnect Switch
5130B Excavator Hydraulic System Control Manifold
Procedure for Replacement of Air Conditioner Components{7320} Procedure for Replacement of Air Conditioner Components{7320}
PC205, PC206, PC210, PC306B, PC310B, PC408B and PC412B Work Tools Piston Motor - Remove
320C Excavator Machine System Specifications Stick
385B Excavator Hydraulic System Oil Sample - Obtain
385B Excavator Swing Drive Oil Sample - Obtain
385B Excavator Engine Oil Sample - Obtain
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Blade Cylinder - Remove and Install
303 CR Mini Hydraulic Excavator Engine Supplement Shutoff Solenoid - Remove and Install
2003/04/07 New Plugs for the Main Hydraulic Control Valve Are Available {5051}
M315C Excavator Hydraulic System Main Hydraulic Pump Air - Purge
M315C Excavator Hydraulic System Swing Pump Air - Purge
321C CR Excavator Tool Control System System 3: One-Way/Two Pump/Foot Switch
321C CR Excavator Tool Control System System 5: Two-Way/One Pump/Pedal
320B, 320B L and 320B N Excavators Cooling System Coolant Sample (Level 1) - Obtain