2000/06/26 Caterpillar

Excavator:

345B Series II (PIN: AMA1-UP; ALB1-UP; APB1-UP; ALD1-UP; AMD1-UP; AKJ1-UP; AMJ1-UP; ALL1-UP; AMN1-UP; AYR1-UP; AGS1-UP; ALT1-UP; AKX1-UP)

The setting for the power shift pressure should be changed on page 37. The values are changed in four places: Step 4, Step 4f (two places) and Step 4i. The correct setting is 2550 ± 50 kPa (370 ± 7.25 psi). The former value is 2950 kPa (430 psi). Step 4f instructs the reader to enter a power shift pressure on the monitor panel. The value should be 2550 ± 50 kPa (370 ± 7.25 psi). Change both values in Step 4f to 2550 ± 50 kPa (370 ± 7.25 psi). Step 4i instructs the reader to adjust four characters on the controller display. The four characters are "2550". The former value is "2950".

A new Testing and Adjusting, RENR3744-01 is available. The power shift pressure is correct in this publication.