Water Pump - Disassemble
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 5F-7344 | 拉拔器板(1) | 1 |
5F-7345 | 螺钉(1) | 1 | |
7S-7789 | 保险杠(1) | 2 | |
B | 1P-1861 | 挡圈钳 | 1 |
C | 8B-7554 | 拉拔器总成 | 1 |
Show/hide table
(1) | 8B-7554 轴承外圈拉拔器 的一部分 |
开始:
- 拆下水泵。 请参阅 拆解和组装, "水泵 - 拆卸" 。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
图 1 | g01020687 |
- 拆除将水泵与散热器相连的弯头组件。 拆除将水泵与机油冷却器相连的弯头组件。
- 拆下盖螺栓 (3) 。 将壳体 (9) 从盖上小心地分离。
- 固定住六角垫圈 ( 1)。 拆下内六角头螺栓 ( 4)。
- 拆下轴承 (5)。
- 使用工具 (A),卸下齿轮 ( 6)。
- 使用工具 (B) 拆下挡圈 ( 7)。
- 利用工具 (C) 拆下叶轮 ( 11)。
- 利用适当的压具拆除内轴承 ( 5) 和轴组件 (8)。
- 拆下水封 (10)。
- 拆下油封 (2)。
Caterpillar Information System:
304.5 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove and Install
M325B Material Handler Power Train Axle - Assemble - Nonsteered Axle
37-MT, 41-MT, and 42-MT Series Starting Motors Normal Operation
304.5 Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
M325B Material Handler Machine Systems Control Valve (Stabilizer) - Assemble
M325B Material Handler Power Train Axle - Disassemble - Steer Axle
37-MT, 41-MT, and 42-MT Series Starting Motors Component Description
M325B Material Handler Power Train Axle - Disassemble - Nonsteered Axle
37-MT, 41-MT, and 42-MT Series Starting Motors Service Tools
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Before Operation
M325B Material Handler Machine Systems Control Valve (Stabilizer) - Disassemble
2000/06/19 Special Instruction, REHS0807-01 Has New Machine Applications {6001, 6103, 6503, 6513}
320C Excavator Machine System Specifications Main Control Valve
320B, 320C, 322B, 322C, 325, 325B, 325C, 325D, 330, 330B, 330C, 330D, 345B, 345B Series II, 345C, 350, 350L, 365B, 365BL, 365BL Series II, 365C, 375L, 385C, 5080, M318, M320, M325B, M325C, M325D, W330B and W345B Series II Excavators Magnet Controller Magnet Does Not Lift Material
M325B Material Handler Power Train Differential - Disassemble
G3300 Engines Exhaust Bypass - Inspect
320C Excavator Machine System Specifications Stick Cylinder
M325B Material Handler Power Train Differential - Assemble
304.5 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Remove and Install
320C Excavator Machine Systems Gear Pump (Auxiliary) - Remove
G112, G115, G125 and G140 Mechanical Grapple Stick Bracket
320C Excavator Machine Systems Gear Pump (Auxiliary) - Install
3176C and 3196 Engines For Caterpillar Built Machines Water Pump - Assemble
MP-15, MP-20, MP-30 and MP-40 Multi Processors Shear Jaw - Disassemble - Tank