Usage:
(1) End play for shaft ... .0065 ± .0025 in.(0.165 ± 0.064 mm)
Radial clearance for the shaft ... .004 to .009 in.(0.10 to 0.23 mm)
(2) Bore in the bearing ... .6268 to .6272 in.(15.921 to 15.931 mm)
Diameter of surface on shaft (journal) for the bearing ... .6250 to .6254 in.(15.875 to 15.885 mm)
(3) Put 8S6747 Gasket Sealer on bolts holding compressor housing and tighten to ... 105 ± 5 lb. in.(11.9 ± 0.6 N·m)
(4) Put 9M3710 Anti-Seize Compound on bolts holding turbine housing and tighten to ... 175 ± 15 lb. in.(19.8 ± 1.7 N·m)
(5) Put 9M3710 Anti-Seize Compound on threads and tighten bolts holding turbocharger to piping from manifold ... 40 ± 4 lb. ft.(55 ± 5 N·m)
(6) See TURBOCHARGER IMPELLER INSTALLATION.
(7) Clearance between ends of oil seal ring (earlier) ... .001 to .006 in.(0.03 to 0.15 mm)
Clearance between ends of oil seal ring (later) ... .008 to .015 in.(0.20 to 0.38 mm)
(8) Torque for bolts holding thrust plate ... 35 ± 5 lb. in.(4.0 ± 0.6 N·m)
(9) Bore in housing ... .9827 to .9832 in.(24.961 to 24.973 mm)
Outside diameter of the bearing ... .9780 to .9785 in.(24.841 to 24.854 mm)