Starting Motor 2S900 24V (Delco-Remy Number 1113969)
Usage:
Rotation is clockwise when seen from drive end.
Minimum speed with no load ... 5500 rpm
Maximum speed with no load ... 7500 rpm
Current consumption (draw) at no load:
Minimum with solenoid at 20 V ... 75 A
Maximum with solenoid at 20 V ... 95 A
Clearance between pinion and housing (pinion clearance) ... .36 in.(9.1 mm)
(1) Tension of brush spring ... 80 oz.(2.27 kg)
(2) Torque for screws holding nose housing to lever housing ... 13 to 17 lb.ft.(1.8 to 2.4 mkg)
(3) Torque for terminal nuts ... 20 to 25 lb.ft.(2.8 to 3.5 mkg)
Caterpillar Information System:
D342 INDUSTRIAL & MARINE ENGINES Alternator Regulator 2N7279 24V (Motorola Number TVR24-29C)
D342 INDUSTRIAL & MARINE ENGINES Alternators
D342 INDUSTRIAL & MARINE ENGINES Flywheel Housing
D342 INDUSTRIAL & MARINE ENGINES Flywheel
D342 INDUSTRIAL & MARINE ENGINES Vibration Damper
D342 INDUSTRIAL & MARINE ENGINES Crankshaft
D342 INDUSTRIAL & MARINE ENGINES Connecting Rod
D342 INDUSTRIAL & MARINE ENGINES Piston And Rings
D342 INDUSTRIAL & MARINE ENGINES Cylinder Liner
D342 INDUSTRIAL & MARINE ENGINES Cylinder Block
D342 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D342 INDUSTRIAL & MARINE ENGINES Cooling System Pressure Cap (6L8617)
D342 INDUSTRIAL & MARINE ENGINES Starter Solenoid 4M1812 24V (Delco-Remy Number 1119832)
D342 INDUSTRIAL & MARINE ENGINES Safety Control Shutoff
D342 INDUSTRIAL & MARINE ENGINES Governor Linkage Adjustment (Woodward UG-8 Governor)
D342 INDUSTRIAL & MARINE ENGINES Governor Drive (Woodward UG-8 Governor)
D342 INDUSTRIAL & MARINE ENGINES Auxiliary Drive
D342 INDUSTRIAL & MARINE ENGINES Fan Drive (7L4002)
D342 INDUSTRIAL ENGINE ATTACHMENTS Fan Belts
D342 INDUSTRIAL ENGINE ATTACHMENTS Belt Tightener
D342 INDUSTRIAL ENGINE ATTACHMENTS Fan Drive
D342 INDUSTRIAL ENGINE ATTACHMENTS Fan Assembly
D342 INDUSTRIAL ENGINE ATTACHMENTS Alternator Regulator
D342 INDUSTRIAL ENGINE ATTACHMENTS Primary Fuel Filter