Rocker Arm - Remove
拆卸步骤
开始:
- 拆下气门机构。 请参阅拆解和组装, "气门机构 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 从摇臂轴上卸下螺栓 (4) 。
Show/hide table
 | |
| 图 1 | g00940747 |
Show/hide table
 | |
| 图 2 | g00563304 |
Show/hide table
 | |
| 图 3 | g00563302 |
- 在所有部件上作识别标记，以便装配。
- 从摇臂轴的一端卸下螺栓 (3) 和盘 (2) 。
- 从摇臂轴 (5) 上卸下摇臂 (6) 、摇臂 (7) 和摇臂 (8) 。
- 从摇臂上卸下按钮 (1) 和 O 形密封圈。
注: 使用 O 形密封圈将按钮 (1) 固定在摇臂上的合适位置。
Caterpillar Information System:
Generator Set Control Panel for Switchgear Conversion CID 0102 FMI 08 Pressure Sensor (Boost) Abnormal Signal - Test
3412E, C30 and C32 Marine Engines Front Cover - Install
3412E, C30 and C32 Marine Engines Front Cover - Remove
G3408 and G3412 Engines Electrical System
G3606 and G3608 Engines Valve Cover - Remove and Install
G3408 and G3412 Engines Air Starting System
G3408 and G3412 Engines Basic Block
G3606 and G3608 Engines Crankcase Breather - Remove and Install
3412E, C30 and C32 Marine Engines Vibration Damper and Pulley - Remove and Install
Alignment of Two-Bearing Generators{4471} Alignment of Two-Bearing Generators{4471}
3600 Distillate Fuel Engines Engine Power Ratings
Generator Set Control Panel for Switchgear Conversion CID 0100 FMI 08 Pressure Sensor (Engine Oil) Abnormal Signal - Test
G3606 and G3608 Engines Rocker Arm - Install
Generator Set Control Panel for Switchgear Conversion CID 0110 FMI 08 Temperature Sensor (Engine Coolant) Abnormal Signal - Test
Generator Set Control Panel for Switchgear Conversion CID 0172 FMI 04 Temperature Sender (Inlet Air) Voltage Below Normal - Test
Electric Protection System Energize-To-Shutoff (ETS) For Generator Set, Industrial and Marine Diesel Engines Troubleshooting the ETS Partial Protection System (OP, WT) - 3200-3400 Engines
G3606 and G3608 Engines Valve Mechanism - Remove
Generator Set Control Panel for Switchgear Conversion CID 0175 FMI 08 Temperature Sensor (Engine Oil) Abnormal Signal - Test
Generator Set Control Panel for Switchgear Conversion CID 0248 FMI 02 CAT Data Link Incorrect - Test
Generator Set Control Panel for Switchgear Conversion CID 0460 FMI 08 Pressure Sensor (Fuel) Abnormal Signal - Test
Generator Set Control Panel for Switchgear Conversion CID 0819 FMI 02 Display Data Link Incorrect - Test
797 Off-Highway Truck Power Train Relief Valve (Torque Converter Inlet)
Generator Set Control Panel for Switchgear Conversion CID 0821 FMI 03 Display Power Supply Voltage Above Normal - Test
G3606 and G3608 Engines Valve Mechanism - Install