Pistons And Rings
Usage:
Make reference to Guideline For Reusable Parts: Pistons. Form No. SEBF8049.
(4) Bore in piston for pin ... 62.245 ± 0.005 mm (2.4506 ± .0002 in.)
Clearance between pin and bore in piston (new) ... 0.010 to 0.030 mm (.0004 to .0012 in.)
Maximum permissible clearance between piston pin and bore in piston (worn) ... 0.05 mm (.002 in.)
NOTE: When installed in the engine, the "V" mark on top of the piston must be in alignment with the "V" mark on the cylinder block.
Caterpillar Information System:
G379, G398 & G399 ENGINES Cylinder Liner Projection (Later)
G379, G398 & G399 ENGINES Cylinder Block (Later)
G379, G398 & G399 ENGINES Cylinder Liner Projection (Earlier)
G379, G398 & G399 ENGINES Cylinder Liner
G379, G398 & G399 ENGINES Cylinder Block (Earlier)
G379, G398 & G399 ENGINES Water Temperature Regulator
G379, G398 & G399 ENGINES Auxiliary Water Pump
G379, G398 & G399 ENGINES Fresh Water Pumps
G379, G398 & G399 ENGINES Prelube Pump
G379, G398 & G399 ENGINES Turbocharger Lubrication Valve
G379, G398 & G399 ENGINES Oil Filter
G379, G398 & G399 ENGINES Engine Oil Pressure
G379, G398 & G399 ENGINES Crankshaft
G379, G398 & G399 ENGINES Connecting Rod
G379, G398 & G399 ENGINES Connecting Rod Bearings
G379, G398 & G399 ENGINES Main Bearings
G379, G398 & G399 ENGINES Bearing Surface (Journal) For Connecting Rods
G379, G398 & G399 ENGINES Bearing Surface (Journal) For Main Bearings
G379, G398 & G399 ENGINES Vibration Damper
G379, G398 & G399 ENGINES Front Accessory Drive
G379, G398 & G399 ENGINES Flywheel
G379, G398 & G399 ENGINES Flywheel Housing
G379, G398 & G399 ENGINES Flywheel Runout
G379, G398 & G399 ENGINES Flywheel Housing Runout