3176C and 3196 Marine Engines Caterpillar

Illustration 1	g01431140

(1) Core assembly

(2) Plug

Apply 5P-3413 Pipe Sealant to the plug threads.

Tighten the plug to the following torque. ... 55 ± 5 N·m (40 ± 4 lb ft)

(3) Plug

Apply 5P-3413 Pipe Sealant to the plug threads.

Tighten the plug to the following torque. ... 75 ± 5 N·m (55 ± 4 lb ft)

(4) Water pump

Illustration 2	g01431146
Section A-A

(A) Install the hose clamps at the following angle. ... 90 degrees

Illustration 3	g01431160

(5) Core assembly

Illustration 4	g01431162
Detail B

The oil flow rate through the cooler assembly is 123 L/min (32 US gpm). The maximum water flow through the cooler assembly is 262 L/min (69 US gpm).

Lubricate the core with engine oil. Press the core into the housing to the following dimensions at both ends.

(B) The depth of the plate is the following value. ... 5.5 ± 0.5 mm (0.22 ± 0.02 inch)

(C) The depth of the tube is the following value. ... 1.5 ± 0.5 mm (0.06 ± 0.02 inch)