C-10 and C-12 Industrial Engines Caterpillar

Illustration 1	g01436898
(2) Core assembly (3) Water pump

(1) Apply 5P-3413 Pipe Sealant to the plug threads.

Illustration 2	g01436902
Section A-A

(B) Install the hose clamps at the following angle. ... 30 ± 5 degrees

Illustration 3	g01436903
(2) Core assembly

Illustration 4	g01436906
Detail C

The oil flow rate through the cooler assembly is 123 L/min (32 US gpm). The maximum water flow through the cooler assembly is 262 L/min (69 US gpm).

Lubricate the core with engine oil. Press the core into the housing to the following dimensions at both ends.

(D) The depth of the plate is the following value. ... 5.5 ± 0.5 mm (0.22 ± 0.02 inch)

(E) The depth of the tube is the following value. ... 1.5 ± 0.5 mm (0.06 ± 0.02 inch)