Auxiliary Water Pump
Show/hide table
Illustration 1 | g00509562 |
(1) Tighten three screws to the following torque. ... 11 ± 3 N·m (8 ± 2 lb ft)
Show/hide table
Illustration 2 | g00509595 |
View A-A |
(2) Apply 9S-3263 Thread Lock Compound on the threads of the impeller.
(3) Tighten the nuts to the following torque. ... 40 ± 5 N·m (30 ± 4 lb ft)
Show/hide table
Illustration 3 | g00509560 |
(4) Tighten the nut to the following torque. ... 55 ± 7 N·m (41 ± 5 lb ft)
Lightly tap the gear with a hammer. Tighten the nut again to the following torque. ... 55 ± 7 N·m (41 ± 5 lb ft)
Caterpillar Information System:
3126 Truck Engine Engine Oil Temperature Sensor
3408E and 3412E Industrial Engines Coolant Level Sensor
3406E Truck Engines Accelerator Pedal Position Sensor
3176C and 3196 Engines for Caterpillar Built Machines Fuel System
3406E and 3456 Engines for Caterpillar Built Machines Fuel Pressure Sensor
3306B Industrial Engine Air Inlet And Exhaust System
3054 Engine Crankshaft Seals
3306B Industrial Engine Fan Drive - Remove
3412E and C30 Engines Alternator and Regulator
3406E On-Highway Engine Camshaft - Remove
3306B Industrial Engine Fan - Remove and Install
3208 Marine Engine Gauges and Indicators
3208 Marine Engine Alternator - Inspect
3306C Truck Engine Vibration Damper and Pulley - Remove and Install
3306B Industrial Engine Instrument Panel
3306B Industrial Engine Shutoff and Alarm System
3306B Industrial Engine Rear Power Take-Off (RPTO)
3306B Industrial Engine Electric Shutoff System
3306B Industrial Engine Time Delay Relay
3406E On-Highway Engine Camshaft - Install
3306B Industrial Engine Instruments and Indicators
3306B Industrial Engine Fan Drive - Install
3306B Industrial Engine Shutoff And Alarm System Components
3306C Engines for Caterpillar Built Machines Water Pump