Breather Assembly May Leak on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {5056, 5068, 7479} Caterpillar


Breather Assembly May Leak on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {5056, 5068, 7479}

Usage:

M315D2 CA4
Material Handler
MH3022 (S/N: FM21-UP; FB31-UP)
MH3024 (S/N: FM41-UP; FB51-UP; FB71-UP)
MH3026 (S/N: FB91-UP)
Mobile Hydraulic Power Unit
M316F MHPU (S/N: CP51-UP)
Wheeled Excavator
M314F (S/N: FB41-UP; F4A1-UP)
M315D2 (S/N: CA41-UP)
M315F (S/N: F4D1-UP)
M316F (S/N: FB61-UP; F6N1-UP)
M317D2 (S/N: CA61-UP)
M317F (S/N: F6P1-UP)
M318F (S/N: FB81-UP; F8B1-UP)
M320D2 (S/N: CH91-UP)
M320F (S/N: FB21-UP; F2W1-UP)
M322F (S/N: FBW1-UP; F2Z1-UP)
M323F (S/N: RH31-UP)

Introduction

Table 1
Revision History 
Revision  Summary of Changes 
01  Changes were made to the Illustration. 

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem



Illustration 1g06368151
461-0599 Hydraulic Tank Gp
(A) 432-6061 Breather As

Reports have been received that the breather assembly (A) may leak on the machines listed above.

Solution

In the event of failure, replace the 432-6061 Breather As with the same part number.

Caterpillar Information System:

Maximizing the Transmission Solenoid Performance on Certain Telehandlers {3073, 3167} Maximizing the Transmission Solenoid Performance on Certain Telehandlers {3073, 3167}
Installation of Wheel Chock Kit for 986H Wheel Loader and 986K Wheel Loader {7192} Installation of Wheel Chock Kit for 986H Wheel Loader and 986K Wheel Loader {7192}
789D CMD Off-Highway Trucks (Command for Hauling) Power Train Electronic Control System Transmission Shifting Function
New Software Version is Now Available for Certain Cat® Terrain for Drilling {7610, 7620} New Software Version is Now Available for Certain Cat® Terrain for Drilling {7610, 7620}
PM310, PM312, and PM313 Cold Planer Operation Information
The Brake Filter Bypass Switch May Fail on Certain 700 Series Articulated Trucks {3004, 3067} The Brake Filter Bypass Switch May Fail on Certain 700 Series Articulated Trucks {3004, 3067}
Air Conditioning Pressure Sensor May Fail on Certain 745 Articulated Trucks {1439, 1808} Air Conditioning Pressure Sensor May Fail on Certain 745 Articulated Trucks {1439, 1808}
Product Link Antenna May Fail on Certain 700 Series Articulated Trucks {7338, 733B, 733T, 7606} Product Link Antenna May Fail on Certain 700 Series Articulated Trucks {7338, 733B, 733T, 7606}
Body Position Sensor May Fail on Certain 700 Series Articulated Truck {1408, 1439, 5736} Body Position Sensor May Fail on Certain 700 Series Articulated Truck {1408, 1439, 5736}
Heating Ventilation and Air Conditioning (HVAC) Sensor May Fail on Certain 745 Articulated Trucks {1439, 7320} Heating Ventilation and Air Conditioning (HVAC) Sensor May Fail on Certain 745 Articulated Trucks {1439, 7320}
Backup Alarm May Fail on Certain 700 Series Articulated Trucks {1408, 7406} Backup Alarm May Fail on Certain 700 Series Articulated Trucks {1408, 7406}
The CMPD Monitor May Malfunction on Certain 700 Series Articulated Trucks {1408, 7301, 7490} The CMPD Monitor May Malfunction on Certain 700 Series Articulated Trucks {1408, 7301, 7490}
The Operation and Maintenance Manuals for 795 AC and 797 Off-Highway Trucks have been updated with Wheel Adapter - Inspect procedure {0374, 3258, 3260, 4201} The Operation and Maintenance Manuals for 795 AC and 797 Off-Highway Trucks have been updated with Wheel Adapter - Inspect procedure {0374, 3258, 3260, 4201}
Check the Bypass and Pressure Switch Harness Connections at the Front and Rear Axle Oil Filters on R1600H Load Haul Dump Machines {1408} Check the Bypass and Pressure Switch Harness Connections at the Front and Rear Axle Oil Filters on R1600H Load Haul Dump Machines {1408}
BD118 and BD121 Side Discharge Bucket Approved Machines
Improved Product Link Off-Board Software is Now Available for All Cat® Products {7606} Improved Product Link Off-Board Software is Now Available for All Cat® Products {7606}
Procedure to Install the 572-9451 Hood Support Brace and Mounting Gp on Certain Telehandlers {7263} Procedure to Install the 572-9451 Hood Support Brace and Mounting Gp on Certain Telehandlers {7263}
Updated Pump Signal Lines Gp is Now Used on Certain Motor Graders {5057} Updated Pump Signal Lines Gp is Now Used on Certain Motor Graders {5057}
Installation of New Shift Lever Assembly for All Starter Motors {1453} Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453} Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453} Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453} Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453} Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure for Replacing Regulator Kit on All Engines {1405} Procedure for Replacing Regulator Kit on All Engines {1405}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.