Approved Machines
Do not use this work tool on machines that are not approved by Caterpillar.
Note: If the machine is equipped with an enclosed cab, operate the machine with the cab door in the CLOSED position.
At the time of publication, the BD118 and BD121 are approved for use on the following Caterpillar machines.
Show/hide table
| Machine | Model | Side Discharge Bucket | |
|---|---|---|---|
| BD118 | BD121 | ||
| SSL | All | (1) | (1) |
| CWL | 906K | (1) | (1) |
| 906M | (1) | (1) | |
| 907K | (1) | (1) | |
| 907M | (1) | (1) | |
| 908K | (1) | (1) | |
| 908M | (1) | (1) | |
Show/hide table
| (1) | This machine is compatible with this work tool. |
Note: Hose and/or electrical connection kits may be required to achieve correct connection between newer model Box blade and older model Machines. Contact your local Cat dealer for details.
Caterpillar Information System:
Check the Bypass and Pressure Switch Harness Connections at the Front and Rear Axle Oil Filters on R1600H Load Haul Dump Machines {1408} Check the Bypass and Pressure Switch Harness Connections at the Front and Rear Axle Oil Filters on R1600H Load Haul Dump Machines {1408}
The Operation and Maintenance Manuals for 795 AC and 797 Off-Highway Trucks have been updated with Wheel Adapter - Inspect procedure {0374, 3258, 3260, 4201} The Operation and Maintenance Manuals for 795 AC and 797 Off-Highway Trucks have been updated with Wheel Adapter - Inspect procedure {0374, 3258, 3260, 4201}
Breather Assembly May Leak on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {5056, 5068, 7479} Breather Assembly May Leak on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {5056, 5068, 7479}
Maximizing the Transmission Solenoid Performance on Certain Telehandlers {3073, 3167} Maximizing the Transmission Solenoid Performance on Certain Telehandlers {3073, 3167}
Installation of Wheel Chock Kit for 986H Wheel Loader and 986K Wheel Loader {7192} Installation of Wheel Chock Kit for 986H Wheel Loader and 986K Wheel Loader {7192}
789D CMD Off-Highway Trucks (Command for Hauling) Power Train Electronic Control System Transmission Shifting Function
New Software Version is Now Available for Certain Cat® Terrain for Drilling {7610, 7620} New Software Version is Now Available for Certain Cat® Terrain for Drilling {7610, 7620}
PM310, PM312, and PM313 Cold Planer Operation Information
The Brake Filter Bypass Switch May Fail on Certain 700 Series Articulated Trucks {3004, 3067} The Brake Filter Bypass Switch May Fail on Certain 700 Series Articulated Trucks {3004, 3067}
Air Conditioning Pressure Sensor May Fail on Certain 745 Articulated Trucks {1439, 1808} Air Conditioning Pressure Sensor May Fail on Certain 745 Articulated Trucks {1439, 1808}
Product Link Antenna May Fail on Certain 700 Series Articulated Trucks {7338, 733B, 733T, 7606} Product Link Antenna May Fail on Certain 700 Series Articulated Trucks {7338, 733B, 733T, 7606}
Body Position Sensor May Fail on Certain 700 Series Articulated Truck {1408, 1439, 5736} Body Position Sensor May Fail on Certain 700 Series Articulated Truck {1408, 1439, 5736}
Improved Product Link Off-Board Software is Now Available for All Cat® Products {7606} Improved Product Link Off-Board Software is Now Available for All Cat® Products {7606}
Procedure to Install the 572-9451 Hood Support Brace and Mounting Gp on Certain Telehandlers {7263} Procedure to Install the 572-9451 Hood Support Brace and Mounting Gp on Certain Telehandlers {7263}
Updated Pump Signal Lines Gp is Now Used on Certain Motor Graders {5057} Updated Pump Signal Lines Gp is Now Used on Certain Motor Graders {5057}
Installation of New Shift Lever Assembly for All Starter Motors {1453} Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453} Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453} Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453} Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453} Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure for Replacing Regulator Kit on All Engines {1405} Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405} Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
New Joystick Control Group for the Outriggers and Rear Auxiliary Hydraulics Is Now Used on Certain Telehandlers {7451} New Joystick Control Group for the Outriggers and Rear Auxiliary Hydraulics Is Now Used on Certain Telehandlers {7451}
Installation of New Oil Pan Group with Sight Gauge Group on All Field 785C and 785D Off Highway Truck Engines {1302, 7479} Installation of New Oil Pan Group with Sight Gauge Group on All Field 785C and 785D Off Highway Truck Engines {1302, 7479}