Valve Rocker Arms and Lifters
Show/hide table
 | |
| Illustration 1 | g00438570 |
Show/hide table
 | |
| Illustration 2 | g00438574 |
View A-A | |
(1) Valve rocker arm assembly
- Bore in the rocker arm for the shaft ( new) ... 24.808 ± .020 mm (0.9767 ± 0.0008 inch)
- Diameter of the rocker arm shaft ( new) ... 24.755 ± .010 mm (0.9746 ± 0.0004 inch)
(2) Tighten the locknut to the following torque. ... 30 ± 7 N·m (22 ± 5 lb ft)
(3) Valve lash
- Inlet valves ... 0.38 mm (0.015 inch)
- Exhaust valves ... 0.64 mm (0.025 inch)
(4) Lifter assembly
- Bore in the lifter arm for the shaft ( new) ... 15.670 ± 0.012 mm (0.6169 ± 0.0005 inch)
- Diameter of shaft ( new) ... 15.620 ± 0.018 mm (0.6150 ± 0.0007 inch)
(5) Apply 9S-3263 Thread Lock Compound. Tighten the bolts that are shown above in a numerical sequence to the following torque. ... 13 ± 3 N·m (10 ± 2 lb ft)
(6) The lifter group must be installed with the oil holes in the shaft. The installation procedure is shown in illustration 2.
Caterpillar Information System:
C-10 and C-12 Truck Engines Cooling System
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Piston and Rings
3126 Truck Engine Fuel Transfer Pump - Fuel Transfer Pump and High Pressure Oil Pump
C-10 and C-12 Truck Engines Lubrication System
3126 Truck Engine Unit Injector
3126B Marine Engine Fuel Filter Base
3512 Industrial Engine Customer Specified Parameters
3126 Industrial Engine Fuel Filter Lines
3126E and 3126B Commercial and Truck Engines Engine Protection Plans
3116 Truck Engine Reference Material
3126 Truck Engine (Military) Emissions Warranty Information
3126 Truck Engine (Military) California Emission Control Warranty Statement
3126 Truck Engine Cylinder Head Valves
3126 Truck Engine Valve Mechanism Cover
C-10 and C-12 Truck Engines Basic Block
3126B Engine for Caterpillar Built Machines Cylinder Head
3126 Truck Engine Camshaft
3126 Truck Engine Exhaust Manifold
Electronic Modular Control Panel II+ (EMCP II+) Starting Motor Magnetic Switch - Test - 3412C, 3508, 3512, and 3516 MUI Engines Only
C-10 and C-12 Truck Engines Electrical System
EMCPII+ for Gas Engines Symbols
3126B and 3126E Truck Engines Exhaust Elbow
C-10 and C-12 Truck Engines Compression Brake
3126B Marine Engine Rear Seal Carrier - If Equipped