Engine Oil Filter Base
Show/hide table
Illustration 1 | g02599568 |
Show/hide table
Specification for 4N-2387 Engine Oil Filter Gp     | |||
Item     | Qty     | Part     | Specification Description     |
1     | 2     | 4N-8150 Spring     | Length under test force is 55.24 mm (2.175 inch). Test force is 75.619 ± 5.800 N (17.000 ± 1.304 lb). Free length after test is 93.726 mm (3.6900 inch).     |
2     | 2     | 2P-4304 Hollow Stud     | Length for applying red Loctite 271 on the tapered end of the hollow stud is 7.6 mm (0.30 inch). Torque to 81 ± 14 N·m (60 ± 10 lb ft).     |
Caterpillar Information System:
3412 Generator Set Engines Engine Oil Pressure Sensor
3412E and C30 Marine Engines Cooling System
3412 Generator Set Engines Lubrication System
3412C Engine Engine Oil Pump
3306C Truck Engine Pressure Switch (Air Inlet Heater)
3306C Truck Engine Temperature Sensor (Air Inlet Heater)
3412 Generator Set Engines Air Inlet And Exhaust System
3306B Industrial Engine Air Compressor
3306C Truck Engine Shutoff Solenoid
3306C Truck Engine Shutoff Solenoid
3412 Generator Set Engines Electric Starting Motor
3306B Industrial Engine Shutoff Solenoid
3618 Engine Engine Mounts - Check
G3612 and G3616 Engines Ignition System
3618 Engine Fuel System - Prime
3412 Generator Set Engines Cylinder Block
3034 Engine for Caterpillar Built Machines Engine Design
3034 Engine for Caterpillar Built Machines Fuel Transfer Pump
3412 Generator Set Engines Inlet Air Temperature Sensor
3034 Engine for Caterpillar Built Machines Engine Oil Pan
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pressure
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings
3412 Generator Set Engines Coolant Temperature Switch
3034 Engine for Caterpillar Built Machines Fuel Injection Nozzles