 | |
| Illustration 1 | g00362864 |
 | |
| Illustration 2 | g00367673 |
Typical solenoid connections | |
When the electric starting motor is viewed from the pinion end, the motor rotates in the following direction. ... Clockwise
No load conditions at 25 °C (77 °F)
- Speed ... 6950 ± 1650 rpm
- Current draw ... 115 ± 25 amp
- Voltage ... 23 V
- Current draw ... 115 ± 25 amp
(1) Tighten the nut on the ground terminal to the following torque. ... 30.5 ± 3.5 N·m (22 ± 3 lb ft)
(2) Three wires are the maximum between the nuts. Tighten the nut on the battery terminal to the following torque. ... 30.5 ± 3.5 N·m (22 ± 3 lb ft)
(3) Tighten the ground terminal to the following torque. ... 2.25 ± 0.25 N·m (20 ± 2 lb in)
(4) Tighten the nut on the switch terminal to the following torque. ... 2.25 ± 0.25 N·m (20 ± 2 lb in)
(5) Tighten the nut on the motor terminal to the following torque. ... 30.5 ± 3.5 N·m (22 ± 3 lb ft)
(6) Tighten the nut on the motor frame terminal to the following torque. ... 30.5 ± 3.5 N·m (22 ± 3 lb ft)
Solenoid
Current draw at 20 V and 25 °C (77 °F)
- Pull-in windings ... 49.3 ± 3.3 Amp
- Hold-in windings ... 6.8 Amp maximum