Differential Pinion - Remove and Install
Show/hide table
Tool | Part Number | Part Description | Qty |
---|---|---|---|
A | - | Guide studs M16 x 2 by 100 mm | 2 |
B | 439-3940 | Bracket As | 2 |
C | - | Loctite 536 | - |
Start By:
- Remove the service brakes.
- Remove two bolts (1) and install Tooling (A).
- Remove the remaining bolts (1) from the pinion housing.
- Slide the pinion housing away from the differential housing.
Show/hide table
Illustration 2 g02525837 - Install Tooling (A) and a suitable lifting device to the pinion gear (2). The weight of the pinion gear (2) is approximately
68 kg (150 lb) . - Remove pinion gear (2) from the axle.
Show/hide table
Illustration 1 | g02525836 |
- Install differential pinion (2) in the reverse order of removal.
- Apply Tooling (C) to the threads of bolts (1).
- Tighten bolts (1) to a torque of
300 ± 40 N·m (221 ± 30 lb ft) .
Caterpillar Information System:
2570D and 2670D Wheel Feller Buncher Power Train Axle Housing - Assemble
An Improved Engine Oil Filter Element Is Now Available on Certain Cat Products {1308} An Improved Engine Oil Filter Element Is Now Available on Certain Cat Products {1308}
CB7 and CB8 Asphalt Compactor Propel System Visual Inspection
2570D and 2670D Wheel Feller Buncher Power Train Axle Housing - Disassemble
CB7 and CB8 Asphalt Compactor Propel System Machine Preparation for Troubleshooting
CB7 and CB8 Asphalt Compactor Propel System Parking Brake - Test
A Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, and 797F Large Off-Highway Trucks is Available {108U, 1408, 1417, 1422, 4493} A Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, and 797F Large Off-Highway Trucks is Available {108U, 1408, 1417, 1422, 4493}
CB7 and CB8 Asphalt Compactor Propel System Travel Speed - Check
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Solid Drum
New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920} New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920}
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Split Drum
994K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Wiring Harness (Open Circuit) - Test
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Wiring Harness (Short Circuit) - Test
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems ECM Software - Install
Cat® Terrain v6 for Grading and Loading Daily Tasks (Material/Ore)
426F2 Back Hoe Loader Machine System Hoe Bucket - Remove and Install
426F2 Back Hoe Loader Machine System Backhoe Bucket Linkage - Remove and Install
426F2 Back Hoe Loader Machine System Hoe Bucket - Remove and Install
Cat® Terrain v6 for Grading and Loading Avoidance Surface
Cat® Terrain v7 for Grading and Loading Lanes
426F2 Back Hoe Loader Machine System Backhoe Bucket Cylinder - Remove and Install
Cat® Terrain v6 for Grading and Loading Avoidance Transgressions Logged
Cat® Terrain v6 for Grading and Loading Detect Proximity and Zone Awareness