Bridge Dowels
Usage:
Remove Bridge Dowels
Start By:
a. remove valves
1. Remove dowels (1) with Tool (A).
NOTE: See Special Instruction, Form No. SMHS7072, to make repairs of loose bridge dowels.
Install Bridge Dowels
1. Install dowels with Tool (A). Dowels must be extended 53.34 ± 0.51 mm (2.100 ± .020 in) above the head surface.
End By:
a. install valves
Caterpillar Information System:
3408 & 3412 INDUSTRIAL ENGINES Valve Guides
3408 & 3412 INDUSTRIAL ENGINES Valves
3408 & 3412 INDUSTRIAL ENGINES Cylinder Head
3408 & 3412 INDUSTRIAL ENGINES Valve Lifters & Push Rods
3408 & 3412 INDUSTRIAL ENGINES Rocker Shaft Assembly
3408 & 3412 INDUSTRIAL ENGINES Valve Covers
3408 & 3412 INDUSTRIAL ENGINES Exhaust Manifold
3408 & 3412 INDUSTRIAL ENGINES Turbocharger (Engine With Four Turbochargers)
3408 & 3412 INDUSTRIAL ENGINES Turbochargers (3408 Engine)
3408 & 3412 INDUSTRIAL ENGINES Aftercooler Core
3412 INDUSTRIAL ENGINES Schematic
3412 INDUSTRIAL ENGINE Testing & Adjusting
3408 & 3412 INDUSTRIAL ENGINES Valve Seat Inserts
3408 & 3412 INDUSTRIAL ENGINES Spacer Plates
3408 & 3412 INDUSTRIAL ENGINES Vibration Damper & Pulley
3408 & 3412 INDUSTRIAL ENGINES Crankshaft Front Seal & Wear Sleeve
3408 & 3412 INDUSTRIAL ENGINES Engine Front Support
3408 & 3412 INDUSTRIAL ENGINES Timing Gear Cover
3408 & 3412 INDUSTRIAL ENGINES Camshaft
3408 & 3412 INDUSTRIAL ENGINES Camshaft Bearings
3408 & 3412 INDUSTRIAL ENGINES Timing Gears
3408 & 3412 INDUSTRIAL ENGINES Crankshaft Rear Seal & Wear Sleeve
3408 & 3412 INDUSTRIAL ENGINES Flywheel
3408 & 3412 INDUSTRIAL ENGINES Flywheel Housing