New Fuel Transfer Pump {1256}
- Caterpillar Products: Machine Engines
- All 3500 Series
Description of Change: A new pump has been released with an increased relief valve setting that will prevent the relief valve from opening during normal engine operations.
Adaptable To: The old fuel transfer pump has been cancelled and replaced by the new fuel transfer pump. Refer to Table 1.
Show/hide table
| Fuel Transfer Pump | |
| Old Part Number | New Part Number |
| 268-1900 | 313-7770 |
| 282-8410 | 322-3830 |
Caterpillar Information System:
3500 Engines Low Engine Oil Pressure
C11 and C15 Engines for Caterpillar Built Machines Engine Temperature Sensor Open or Short Circuit - Test
120M and 12M Motor Graders Hydraulic and Steering System Accumulator (Blade Cushion)
2005/04/18 Replace the Gear when the Sleeve Bearing is Replaced {1212, 1234}
2005/04/18 Replace the Gear when the Sleeve Bearing is Replaced {1212}
2005/04/25 Correction to Specifications , "Brake Control Valve (Service)" {4265}
ECM Replacement Procedure on 700 Series Articulated Trucks{7610} ECM Replacement Procedure on 700 Series Articulated Trucks{7610}
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Braking System Pressure Switch (Parking Brake Oil)
Filtration Procedure for E Series Vibratory Compactors {0680, 0768, 5050, 5056} Filtration Procedure for E Series Vibratory Compactors {0680, 0768, 5050, 5056}
793D Off-Highway Truck Differential and Final Drive Oil Sample - Obtain
Instructions for Converting Hot Saw to Intermittent Saw {5051, 5051, 5057, 6543} Instructions for Converting Hot Saw to Intermittent Saw {5051, 5051, 5057, 6543}
Instructions for Converting Hot Saw to Harvester Head Saw{5051, 5051, 5057, 6543} Instructions for Converting Hot Saw to Harvester Head Saw{5051, 5051, 5057, 6543}
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Water Pump - Remove
789C Off-Highway Truck Drive Shaft Slip Joint - Lubricate
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Using Caterpillar Electronic Technician to Determine Diagnostic Codes
784C and 785C Off-Highway Truck/Tractors Jacking Locations
725, 730 and 730 Ejector Articulated Trucks Engine Supplement Water Pump - Install
PM-201 Cold Planer Machine Lowering with Engine Stopped
725, 730 and 730 Ejector Articulated Trucks Engine Supplement In-Line Refrigerant Dryer - Remove and Install
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Glossary of Electrical Terms
12M, 140M and 160M Motor Graders Hydraulic and Steering System Control Valve (Wing Tilt)
2005/05/23 New ROPS Films, FOPS Films and TOPS Films Have Been Designed {7557}
C11 and C15 Engines for Caterpillar Built Machines Engine Speed/Timing Sensor Circuit - Test
C4.4 Industrial Engine Starting the Engine