D350E and D400E Articulated Trucks Power Train Caterpillar


Solenoid Valve (Lockup Clutch)

Usage:

D400E 2YR

6T-9290 Solenoid Valve Gp




Illustration 1g00931605

(1) Torque for nut ... 2.55 ± 0.25 N·m (22.569 ± 2.213 lb in)

Continuous duty at 25 °C (77.0 °F) ambient temperature ... 17.6 Watts Max

Resistance at 25° ± 5°C (77° ± 9°F) ... 26 ± 2 ohms

Maximum pressure rating ... 3034 kPa (440 psi)

Temperature range ... -40° to 121°C (-40° to 250°F)

Nominal voltage ... 24 VDC

Maximum voltage at 25 °C (77 °F) ambient temperature ... 26.4 VDC

Caterpillar Information System:

D350E and D400E Articulated Trucks Power Train Lockup Clutch and Solenoid Valve
574B Forwarder Power Train Accelerator Pedal
3054E Industrial Engine Camshaft Bearings - Remove and Install
D350E and D400E Articulated Trucks Power Train Priority Valve
793C and 793C XQ Off-Highway Truck Steering System Steering Linkage and Cylinder Mounting
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks ECM Output Circuit (Engine Coolant Temperature Lamp)
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks ECM Output Circuit (Engine Oil Pressure Lamp)
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks ECM Output Circuit (Engine ON Signal)
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers MID 039 - CID 0975 - FMI 08
574B Forwarder Power Train Monitoring System
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Piston Pump (Steering) - Disassemble
773D, 773E, 775D and 775E Off-Highway Trucks Machine Systems Piston Pump (Steering) - Assemble
TH210 and TH215 Telehandlers Power Train Parking Brake Control - Remove and Install
574B Forwarder Power Train On/Off Switches
CB-634D Paving Compactor Machine Electronic Control System Service Tools
14H Motor Grader Machine Systems Blade Lift Cylinder - Remove and Install
Test Sequence for Capsule Type Fuel Nozzles{0782} Test Sequence for Capsule Type Fuel Nozzles{0782}
14H Motor Grader Machine Systems Wheel Lean Bar - Remove and Install
Bench Test Procedure for Hydraulic Piston Pumps{5070} Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070} Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
2002/10/28 Correction to Operation and Maintenance Manual , "Equipment Lowering with Engine Stopped" {7000}
2002/10/21 A Special Instruction, REHS1252, "Field Installation of Body Exhaust Arrangements" Is Available {1061, 7258}
14H Motor Grader Machine Systems Combination Valve - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Pump Control (Output Flow) - Adjust
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.