785G Off-Highway Truck Machines Systems Caterpillar


Window Wiper Motor - Remove and Install

Usage:

785G RTL

Removal Procedure



Illustration 1g06166637


Illustration 2g06166738


Illustration 3g06166864
Mark the alignment of the motor shaft and the control arm for installation purposes.

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
Loctite 243 

  1. Install wiper motor in the reverse or of removal.


Illustration 4g06167176

Caterpillar Information System:

C175-16 Engine for Off-Highway Trucks Engine Oil Pump
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Dosing Control System Operation
3512E Tier 4 Final Engines for 785G Off-Highway Trucks Air Inlet and Exhaust System Operation - Aftertreatment
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Electronic Displacement, Split Drum
Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347} Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347}
Weld Plates for Clamps Are Now Serviceable on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054} Weld Plates for Clamps Are Now Serviceable on Certain Compact Track Loaders, Multi-Terrain Loaders, and Skid Steer Loaders {7054}
High Capacity Final Drive Bearings Are Now Available for Certain Articulated Trucks {4000, 4050, 4051, 7551} High Capacity Final Drive Bearings Are Now Available for Certain Articulated Trucks {4000, 4050, 4051, 7551}
2570D and 2670D Wheel Feller Buncher Power Train Piston Pump (Propel) - Remove and Install
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral (Mechanical) - Test and Adjust - Solid Drum
Procedure To Replace Rock Guards On Certain D6 Track-Type Tractors {4151, 7152, 7173} Procedure To Replace Rock Guards On Certain D6 Track-Type Tractors {4151, 7152, 7173}
A New Steering Column Is Now Used On Certain Asphalt Pavers {4300, 4304, 4309, 4310, 4338, 4343} A New Steering Column Is Now Used On Certain Asphalt Pavers {4300, 4304, 4309, 4310, 4338, 4343}
745 Articulated Truck Retarder Control
CB7 and CB8 Asphalt Compactor Propel System Piston Pump Neutral - Test and Adjust - Electronic Displacement, Solid Drum
AP355F Asphalt Paver Machine Systems Generator - Remove and Install
CB7 and CB8 Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test - Solid Drum
CB7 and CB8 Asphalt Compactor Propel System Case Drain Flow for Piston Motor (Drum Propel) - Test - Split Drum
994K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Disassemble
785G Off-Highway Truck DEF Manifold Filters - Replace
994K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Split Drum
New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920} New Software is Now Used on Certain 785C Off-Highway Truck Engines {1920}
CB7 and CB8 Asphalt Compactor Propel System Speed Sensor (Propel Motor) - Test - Solid Drum
CB7 and CB8 Asphalt Compactor Propel System Travel Speed - Check
A Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, and 797F Large Off-Highway Trucks is Available {108U, 1408, 1417, 1422, 4493} A Procedure to Install an Improved Clean Fuel Module Relay on Certain 793F, and 797F Large Off-Highway Trucks is Available {108U, 1408, 1417, 1422, 4493}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.