Index of Reuse and Salvage Guidelines for the CX38 Transmission {0374, 0599, 0700, 0722, 3030, 3065} Caterpillar


Index of Reuse and Salvage Guidelines for the CX38 Transmission {0374, 0599, 0700, 0722, 3030, 3065}

Usage:

735C LFJ


Articulated Truck
735C (S/N: LFJ1-UP; TFJ1-UP)
740C EJECTOR (S/N: LFN1-UP; TFN1-UP)
745C (S/N: LFK1-UP; TFK1-UP)

Introduction

© 2016 Caterpillar All Rights Reserved. This guideline is for the use of Cat dealers only. Unauthorized use of this document or the proprietary processes therein without permission may be violation of intellectual property law.

Information contained in this document is considered Caterpillar: Confidential Yellow.

This Reuse and Salvage Guideline contains the necessary information to allow a dealer to establish a parts reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost reductions. Every effort has been made to provide the most current information that is known to Caterpillar. Continuing improvement and advancement of product design might have caused changes to your product which are not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information that is available from Caterpillar.

For technical questions when using this document, work with your Dealer Technical Communicator (TC).

To report suspected errors, inaccuracies, or suggestions regarding the document, submit a form for feedback in the Service Information System (SIS Web) interface.

Summary

Index of the service literature that has the information on the reusability and/or repair of the CX38 Transmission and the tools needed to make the repairs.

Transmission Reuse and Salvage Guidelines

Table 1
Transmission Reuse and Salvage Guidelines 
Media Number  Media Title 
M0072352  "CX38 Transmission Pump Inspection Guideline" 
M0072364  "CX38 Transmission Case Inspection Guideline" 
SEBF2105  "Thermal Spray Procedures for Clutch Housing Piston Bore" 
SEBF2106  "Thermal Spray Procedures for Clutch Piston Inside Diameter" 
SEBF2114  "Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts" 
SEBF8017  "Clutch Ring Gears for All Power Shift Transmissions" 
SEBF8060  "Repair of Transmission, Torque Converter, and Torque Divider Shafts" 
SEBF8091  "Reuse and Salvage of Transmission Components" 
SEBF8099  "Repair of Reaction Dowel Holes in Transmission Clutch Housings" 
SEBF8114  "Identification of Non-Metallic Discs used in Power Shift Transmissions" 
SEBF8115  "Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material" 
SEBF8148  "General Salvage and Reconditioning Techniques" 
SEBF8187  "Standardized Parts Marking Procedures" 
SEBF8193  "Reusability of Drive Train Gears" 
SEBF8728  "Specifications for Inspection of Driveline Fasteners" 
SEBF9236  "Fundamentals of HVOF Spray for Reconditioning Components" 
SEBF9238  "Fundamentals of Arc Spray for Reconditioning Components" 
SEBF9240  "Fundamentals of Flame Spray for Reconditioning Components" 

Caterpillar Information System:

2570D and 2670D Wheel Feller Buncher Engine Supplement Fan - Remove and Install
A New Ground Strap for Wiring Group is Now Used On Certain 794 AC Off-Highway Trucks {1408, 3260, 3282} A New Ground Strap for Wiring Group is Now Used On Certain 794 AC Off-Highway Trucks {1408, 3260, 3282}
Installation of the <NOBR>519-9196</NOBR> Lines Gp - Coupler on Certain Backhoe Loaders {5057, 5133, 6129} Installation of the <NOBR>519-9196</NOBR> Lines Gp - Coupler on Certain Backhoe Loaders {5057, 5133, 6129}
C175-16 and C175-20 Engines for Caterpillar Built Machines Engine Oil Filter Housing - Remove and Install
MH3037 Material Handler Machine Systems Piston Motor (Swing) - Assemble
MH3037 Material Handler Machine Systems Piston Motor (Swing) - Disassemble
MH3037 Material Handler Machine Systems Piston Motor (Swing) - Remove and Install
An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324} An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324}
C7.1 Engines and Generator Sets Exhaust Has Excessive White Smoke
980L Tier 3 Wheel Loader Machine System Piston Pump (Brake, Pilot, Fan) - Disassemble
C7.1 Engines and Generator Sets Exhaust Has Excessive Black Smoke
C7.1 Engines and Generator Sets Engine Vibration Is Excessive
Cab Heater Hoses May Rub Against the Cross Member on Certain PL61 Pipelayers {7304} Cab Heater Hoses May Rub Against the Cross Member on Certain PL61 Pipelayers {7304}
A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802} A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Pressure - Test and Adjust
994K Wheel Loader Machine Systems Seat - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
CB7, CB8 and CB10 Vibratory Asphalt Compactors Power Train Drum Mounting
C7.1 Engines and Generator Sets Exhaust System Contains Coolant
C7.1 Engines and Generator Sets Exhaust System Contains Fuel
980L Tier 3 Wheel Loader Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
C7.1 Engines and Generator Sets Exhaust System Contains Oil
980L Tier 3 Wheel Loader Machine System Piston Pump (Implement) - Remove and Install
Improved Coolant Tube Flanges for the Brake Oil Bonnets are Now Used on Certain 793D Off-Highway Trucks {1380} Improved Coolant Tube Flanges for the Brake Oil Bonnets are Now Used on Certain 793D Off-Highway Trucks {1380}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.