C175-16 and C175-20 Engines for Caterpillar Built Machines Caterpillar


Engine Oil Filter Housing - Remove and Install

Usage:

C175 B7B

Removal Procedure



    Illustration 1g06128765

  1. Remove bolts (1) and bolts (3). Slide flanges (2) away from the engine oil filter housing.


    Illustration 2g06129083

  2. Disconnect hose assembly (4), hose assembly (6), and harness assembly (5).


    Illustration 3g06129109

  3. Disconnect hose assembly (7).


    Illustration 4g06129126

  4. Attach a suitable lifting device to oil filter housing (8). The weight of oil filter housing (8) is approximately 96 kg (212 lb).

  5. Remove bolts (9) and remove oil filter housing (8).


    Illustration 5g06129151

  6. Remove bolts (11) and use two people to remove bracket (10). Bracket (10) weighs approximately 36 kg (79 lb).

Installation Procedure

  1. Install oil filter housing (8) in the reverse order of removal.

Caterpillar Information System:

MH3037 Material Handler Machine Systems Piston Motor (Swing) - Assemble
MH3037 Material Handler Machine Systems Piston Motor (Swing) - Disassemble
MH3037 Material Handler Machine Systems Piston Motor (Swing) - Remove and Install
An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324} An Installation Procedure for the TLV2 Seat Suspension Harness is Now Available {1408, 7324}
C7.1 Engines and Generator Sets Exhaust Has Excessive White Smoke
980L Tier 3 Wheel Loader Machine System Piston Pump (Brake, Pilot, Fan) - Disassemble
C7.1 Engines and Generator Sets Exhaust Has Excessive Black Smoke
C7.1 Engines and Generator Sets Engine Vibration Is Excessive
C7.1 Engines and Generator Sets Engine Top Speed Is Not Obtained
2570D and 2670D Wheel Feller Buncher Engine Supplement Solenoid Valve (DEF Heater Coolant) - Remove and Install
C7.1 Engines and Generator Sets Engine Stalls at Low RPM
C7.1 Engines and Generator Sets Engine Shutdown Occurs Intermittently
Installation of the 519-9196 Lines Gp - Coupler on Certain Backhoe Loaders {5057, 5133, 6129} Installation of the 519-9196 Lines Gp - Coupler on Certain Backhoe Loaders {5057, 5133, 6129}
A New Ground Strap for Wiring Group is Now Used On Certain 794 AC Off-Highway Trucks {1408, 3260, 3282} A New Ground Strap for Wiring Group is Now Used On Certain 794 AC Off-Highway Trucks {1408, 3260, 3282}
2570D and 2670D Wheel Feller Buncher Engine Supplement Fan - Remove and Install
Index of Reuse and Salvage Guidelines for the CX38 Transmission {0374, 0599, 0700, 0722, 3030, 3065} Index of Reuse and Salvage Guidelines for the CX38 Transmission {0374, 0599, 0700, 0722, 3030, 3065}
Cab Heater Hoses May Rub Against the Cross Member on Certain PL61 Pipelayers {7304} Cab Heater Hoses May Rub Against the Cross Member on Certain PL61 Pipelayers {7304}
A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802} A New Support Assembly Is Now Used on Certain C9.3 Machine Engines {1405, 1802}
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Pilot Pressure - Test and Adjust
994K Wheel Loader Machine Systems Seat - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
CB7, CB8 and CB10 Vibratory Asphalt Compactors Power Train Drum Mounting
C7.1 Engines and Generator Sets Exhaust System Contains Coolant
C7.1 Engines and Generator Sets Exhaust System Contains Fuel
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.