Water Temperature Regulator - Remove and Install
注: 请参阅技术规格 UENR3421 "发动机设计",了解非指定的发动机扭矩值。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
- 请参阅操作和保养手册, "冷却系统冷却液(ELC)- 更换"以了解正确的排放和加注步骤。
注: 仅需要将冷却液排放到低于水温调节器的液位处。
Show/hide table图 1 g02794379 - 断开软管组件 (1)。
- 将螺栓 (2) 从水温调节器壳体上拆下。 拆下水温调节器弯头 (3)。
Show/hide table
图 2 g02794381 Show/hide table图 3 g02794385 - 拆下密封垫 (5),然后从水温调节器壳体上拆下水温调节器 (4)。
注: 记录水温调节器弯头的方位。
- 按与拆卸相反的顺序安装水温调节器 (4)。
- 检查水温调节器是否正常工作。 请参阅系统操作、测试和调整, "水温调节器 - 测试",以了解测试水温调节器的正确步骤。 如果水温调节器的任何部件磨损或损坏,必须更换整个组件。
Show/hide table图 4 g03388931 - 安装节温器 (4) 时,务必将孔 (6) 朝向前盖侧放置。
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Flywheel - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Remove - Includes Crankshaft Gear
C3.3B Engines for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Install - Includes Crankshaft Gear
C3.3B Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C3.3B Engines for Caterpillar Built Machines Idler Gear - Remove and Install
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000} HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
C3.3B Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
C3.3B Engines for Caterpillar Built Machines Bridge Dowels - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Diesel Particulate Filter - Clean
2014/05/30 Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
C3.3B Engines for Caterpillar Built Machines Water Pump - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
2013/01/21 New Software is Available for Certain 3512C Petroleum Engines {1901, 1920}
C32 Auxiliary Engine Belts - Inspect/Adjust/Replace
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000} Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
2013/03/29 New Engine Oil Hoses Are Used on Certain Excavators Equipped with C13 Engines {1308}
Air Shutoff Test and Inspection for Certain C7 and C9 Petroleum Engines{1078} Air Shutoff Test and Inspection for Certain C7 and C9 Petroleum Engines{1078}