Crankshaft Rear Seal and Wear Sleeve - Install - Includes Crankshaft Gear
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 390-1146 | 曲轴后油封和耐磨套筒冲头 | 1 |
注: 参考技术规格, "发动机设计",了解非指定的发动机扭矩值。
- 将耐磨套筒 (4) 置于曲轴齿轮 (2) 上。 放置工具 (A)。 使用合适的压具安装耐磨套筒 (4)。
Show/hide table
图 2 g02799899 - 对准曲轴齿轮 (2) 与凸轮轴齿轮 (3)。 将曲轴齿轮 (2) 安装到飞轮壳上。
Show/hide table
图 3 g02800140 - 向曲轴后油封 (1) 的唇部涂覆清洁的发动机机油。 使用工具 (A) 安装曲轴后油封 (1)。
Show/hide table
图 1 | g02800138 |
结束:
- 安装飞轮。
Caterpillar Information System:
C3.3B Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
C3.3B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
C3.3B Engines for Caterpillar Built Machines Idler Gear - Remove and Install
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000} HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
C3.3B Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
C3.3B Engines for Caterpillar Built Machines Bridge Dowels - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Diesel Particulate Filter - Clean
2014/05/30 Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
2014/05/30 An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
PM3516 Power Modules Belts - Inspect/Adjust/Replace
C9.3 Tier 4 Final Engines Component Location
C3.3B Engines for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Remove - Includes Crankshaft Gear
C3.3B Engines for Caterpillar Built Machines Flywheel - Remove and Install
C3.3B Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C3.3B Engines for Caterpillar Built Machines Water Pump - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Pump - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C3.3B Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
C3.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
2013/01/21 New Software is Available for Certain 3512C Petroleum Engines {1901, 1920}
C32 Auxiliary Engine Belts - Inspect/Adjust/Replace