Note: Refer to the Service Manual, "Lubrication Injector - Adjust" for the procedure to adjust the injectors.
Each lubrication injector bank contains lubrication injectors that are adjusted. Each application is different. These adjustments match the lubrication requirements of each specific bearing. The specific application should determine the final adjustment. The following information shows the required setting of the adjusting nut for the injectors on each injector bank. Refer to Testing and Adjusting, "Lubrication Injectors - Check and Adjust" for information on adjusting the lubrication injectors.
Refer to System Operation, "General Information" for the location of injector banks.
Show/hide table
|
|
|
Illustration 1 | g01262262 |
(1) Rear injector bank
|
Show/hide table
|
|
|
Illustration 2 | g01262264 |
View D-D
Rear injector bank
|
The injectors in bank (1) require the number of turns that are shown in Table 1.
Show/hide table
Table 1
Turns That Are Required For The Adjusting Nut |
Injector |
Number of Turns |
Color of Adjusting Sleeve |
1A |
2 |
Silver |
1B |
2 |
Silver |
1C |
3 |
Gold |
1D |
2 |
Silver |
1E |
2 |
Silver |
1F |
2 |
Silver |
1G |
4 |
Green |
1H |
2 |
Silver |
1J |
2 |
Silver |
1K |
2 |
Silver |
1L |
3 |
Gold |
1M |
2 |
Silver |
1N |
2 |
Silver |
Show/hide table
|
|
|
Illustration 3 | g01262255 |
(2) Left injector bank
|
Show/hide table
|
|
|
Illustration 4 | g01262256 |
View E-E
Left injector bank
|
The injectors in bank (2) require the number of turns that are shown in Table 2.
Show/hide table
Table 2
Turns That Are Required For The Adjusting Nut |
Injector |
Number of Turns |
Color of Adjusting Sleeve |
2A |
2 |
Silver |
2B |
2 |
Silver |
2C |
2 |
Silver |
2D |
2 |
Silver |
2E |
2 |
Silver |
2F |
2 |
Silver |
2G |
2 |
Silver |
Show/hide table
|
|
|
Illustration 5 | g01262251 |
(3) Right injector bank
|
Show/hide table
|
|
|
Illustration 6 | g01262252 |
View F-F
Right injector bank
|
The injectors in bank (3) require the number of turns that are shown in Table 3.
Show/hide table
Table 3
Turns That Are Required For The Adjusting Nut |
Injector |
Number of Turns |
Color of Adjusting Sleeve |
3A |
2 |
Silver |
3B |
2 |
Silver |
3C |
2 |
Silver |
3D |
2 |
Silver |
3E |
2 |
Silver |
3F |
2 |
Silver |
3G |
2 |
Silver |