Traction Control System (TCS) Wheel Speed Ring - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 5P-5197 | 挡圈钳组件 | 1 |
| B | 136-1452 | 挡圈钳组件 | 1 |
开始:
- 拆下终传动、制动器和车轮（后）或后轮轴壳体。 请参阅拆解和组装, "终传动、制动器和车轮（后）- 拆卸"。
- 拆下传感器 (1) 。
Show/hide table
 | |
| 图 1 | g01262395 |
- 拆下接头 (2) 并拆下垫片 (3) 。
Show/hide table
 | |
| 图 2 | g01262403 |
- 拆卸螺栓 (4) 以便拆下壳体 (5) 。
Show/hide table
 | |
| 图 3 | g01262405 |
- 使用工具 (A) 以便拆下挡圈 (6) 。
Show/hide table
 | |
| 图 4 | g01262425 |
- 拆下牵引力控制轮速传感器 (7) 。
- 使用工具 (B) 拆下挡圈 (8) 。
- 拆下轴承组件 (9) 。
安装步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 5P-5197 | 挡圈钳组件 | 1 |
| B | 136-1452 | 挡圈钳组件 | 1 |
| C | 155-0695 | 螺纹锁固胶 | - |
| D | 5P-3413 | 管密封胶 | - |
- 冷却轴承组件 (9) 。 安装轴承组件 (9) 。
Show/hide table
| | |
| 图 5 | g01262425 |
- 使用工具 (B) 安装挡圈 (8) 。
- 安装牵引力控制轮速传感器 (7) 。
- 使用工具 (A) 以便安装挡圈 (6) 。
- 安装壳体 (5) ，然后安装螺栓 (4) 。
Show/hide table
| | |
| 图 6 | g01262405 |
- 安装垫片 (3) ，然后安装接头 (2) 。 调整垫片 (2) ，以获得 242.03 ± 08 mm (9.5287 ± 0.0031 in) 的轴向间隙。
Show/hide table
| | |
| 图 7 | g01262403 |
Show/hide table
 | |
| 图 8 | g01262511 |
- 拆卸接头 (2) 。 将工具 (C) 涂抹到接头 (2) 上。
- 安装接头 (2) 并拧紧接头 (2) 至扭矩为 55 ± 7 N·m (41 ± 5 lb ft)。
- 将工具 (D) 涂抹到传感器 (1) 上。 安装传感器 (1) 并拧紧传感器 (1) 至扭矩为 30 ± 4 N·m (22 ± 3 lb ft)。
Show/hide table
| | |
| 图 9 | g01262395 |
End By: 安装终传动、制动器和车轮（后）或后轮轴壳体。 请参阅 拆解和组装, "终传动、制动器和车轮（后）- 安装"。
Caterpillar Information System:
777E and 777F Off-Highway Truck Power Train Specifications (Power Train)
R1700G Load Haul Dump Machine Electrical System Engine Start
R1700G Load Haul Dump Power Train MID 081 - CID 0070 - FMI 04
R1700G Load Haul Dump Power Train MID 081 - CID 0070 - FMI 03
R1700G Load Haul Dump Machine Systems Control Valve (Wheel Steering) - Remove
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Monitoring System System Schematic
C27 and C32 Engines for Caterpillar Built Machines CID 0533 FMI 14 Brake Control special instruction
C27 and C32 Engines for Caterpillar Built Machines CID 0533 FMI 09 Brake Control abnormal update rate
583T Pipelayer Engine Supplement Air Cleaner - Remove and Install
C7 PETROLEUM Petroleum Engine Water Temperature Regulator - Remove and Install
The Instructions for the Field Installation of the New 284-8541 Backhoe Lines Gp (Kit) (Field Conversion){5057} The Instructions for the Field Installation of the New 284-8541 Backhoe Lines Gp (Kit) (Field Conversion){5057}
777E and 777F Off-Highway Truck Automatic Lubrication System Lubrication Injector Banks - Adjust
777E and 777F Off-Highway Truck Power Train Transmission Hydraulic System
2006/04/17 Repair of Cracks in the Upper Frame at the Fender Extensions {7050}
773F and 775F Off-Highway Truck Steering System Oil Sample - Obtain
120M and 12M Motor Graders Stopping the Engine if an Electrical Malfunction Occurs
773F Off-Highway Truck and 775F Quarry Truck Steering System Piston Pump (Steering) Pressure - Test and Adjust
2006/07/24 Improvements to Electronics Bay for Sealing and Drainage {1408, 5201, 7276}
C27 and C32 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0168 - FMI 01
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Gear Pump (Transmission)
414E Backhoe Loader Three-Point Hitch - Lubricate
C27 and C32 Engines for Caterpillar Built Machines CID 1273 FMI 14 Chassis Control Module special instruction
C27 and C32 Engines for Caterpillar Built Machines CID 1273 FMI 09 Unable to Communicate with Chassis Control Module