Specifications (Power Train)
Specifications for the Torque Converter
Outlet Relief Valve
Outlet pressure for the torque converter at stall speed with dry brakes ... 552 ± 34 kPa (80 ± 5 psi)
Pressure setting at pressure tap in chassis with wet brakes ... 758 ± 70 kPa (110 ± 10 psi)
Pressure setting at pressure tap in chassis with dry brakes ... 552 ± 70 kPa (80 ± 10 psi)
Flow rate ... 132.5 ± 0.8 L/min (35.0 ± 0.2 US gpm)
Outlet pressure for the torque converter at stall speed with oil cooled brakes ... 758 ± 34 kPa (110 ± 5 psi)
Torque converter outlet pressure at stall speed ... 552 ± 34 kPa (80 ± 5 psi)
Show/hide table
| Spacer Chart for the Outlet Relief Valve | ||
| Pt. No. for the Spacers | Thickness of the Spacers | Pressure Change from one Spacer |
| 5M-9624 Spacer | 0.25 mm (0.010 inch) |
5 kPa (0.7 psi) |
| 5M-9623 Spacer | 0.90 mm (0.035 inch) |
18 kPa (2.6 psi) |
Inlet Relief Valve
Torque converter inlet pressure ... 930 ± 35 kPa (135 ± 5 psi)
Show/hide table
| Spacer Chart for the Inlet Relief Valve | ||
| Pt. No. for the Spacers | Thickness of the Spacers | Pressure Change from one Spacer |
| 5M-9624 Spacer | 0.25 mm (0.010 inch) |
14 kPa (2.0 psi) |
| 5M-9623 Spacer | 0.90 mm (0.035 inch) |
50 kPa (7.3 psi) |
Transmission
Show/hide table
| Speed | Engaged Clutches | Torque Converter Drive | Direct Drive (1) |
| NEUTRAL | 1 | X | - |
| REVERSE | 1 and 7 | X | - |
| FIRST Speed | 2 and 6 | X | X |
| SECOND Speed | 1 and 6 | - | X |
| THIRD Speed | 3 and 6 | - | X |
| FOURTH Speed | 1 and 5 | - | X |
| FIFTH Speed | 3 and 5 | - | X |
| SIXTH Speed | 1 and 4 | - | X |
| SEVENTH Speed | 3 and 4 | - | X |
Show/hide table
| ( 1 ) | The lockup clutch is engaged. |
Show/hide table
| Transmission Shift Points (1) | ||
| Upshift | Standard | Retarder |
| 1C to 1L (2) (3) | - | - |
| 1L to 2 | 1820 ± 30 | 2020 |
| 2 to 3 | 1820 ± 30 | 2020 |
| 3 to 4 | 1820 ± 30 | 2020 |
| 4 to 5 | 1820 ± 30 | 2020 |
| 5 to 6 | 1820 ± 30 | 2020 |
| 6 to 7 | 1820 ± 30 | 2020 |
| Downshift | Standard | Retarder |
| 7 to 6 | 1260 ± 20 | 1420 |
| 6 to 5 | 1260 ± 20 | 1420 |
| 5 to 4 | 1260 ± 20 | 1420 |
| 4 to 3 | 1260 ± 20 | 1420 |
| 3 to 2 | 1260 ± 20 | 1420 |
| 2 to 1L | 1260 ± 20 | 1420 |
| 1L to 1C | 1260 ± 20 | - |
Show/hide table
| ( 1 ) | The listed engine speeds are nominal engine speeds. |
| ( 2 ) | (C) Torque converter drive |
| ( 3 ) | Direct drive (lockup clutch engaged). |
Transmission Oil Pressure
Transmission lubrication pressure at high idle ... 110.31616 ± 27.57904 kPa (16 ± 4 psi)
Transmission lubrication pressure at low idle ... 22.4 ± 19 kPa (3.25 ± 2.75 psi)
Caterpillar Information System:
R1700G Load Haul Dump Machine Electrical System Engine Start
R1700G Load Haul Dump Power Train MID 081 - CID 0070 - FMI 04
R1700G Load Haul Dump Power Train MID 081 - CID 0070 - FMI 03
R1700G Load Haul Dump Machine Systems Control Valve (Wheel Steering) - Remove
279C, 279C2, 289C, 289C2 and 299C Compact Track Loaders, 287C, 277C, 277C2, 287C2 and 297C Multi Terrain Loaders and 246C, 256C, 262C, 262C2 and 272C Skid Steer Loaders Monitoring System System Schematic
C27 and C32 Engines for Caterpillar Built Machines CID 0533 FMI 14 Brake Control special instruction
C27 and C32 Engines for Caterpillar Built Machines CID 0533 FMI 09 Brake Control abnormal update rate
583T Pipelayer Engine Supplement Air Cleaner - Remove and Install
C7 PETROLEUM Petroleum Engine Water Temperature Regulator - Remove and Install
The Instructions for the Field Installation of the New 284-8541 Backhoe Lines Gp (Kit) (Field Conversion){5057} The Instructions for the Field Installation of the New 284-8541 Backhoe Lines Gp (Kit) (Field Conversion){5057}
777E and 777F Off-Highway Truck Automatic Lubrication System Lubrication Injector Banks - Adjust
777E and 777F Off-Highway Truck Power Train System Information (Power Train)
793D Off-Highway Truck Power Train Traction Control System (TCS) Wheel Speed Ring - Remove and Install
777E and 777F Off-Highway Truck Power Train Transmission Hydraulic System
2006/04/17 Repair of Cracks in the Upper Frame at the Fender Extensions {7050}
773F and 775F Off-Highway Truck Steering System Oil Sample - Obtain
120M and 12M Motor Graders Stopping the Engine if an Electrical Malfunction Occurs
773F Off-Highway Truck and 775F Quarry Truck Steering System Piston Pump (Steering) Pressure - Test and Adjust
2006/07/24 Improvements to Electronics Bay for Sealing and Drainage {1408, 5201, 7276}
C27 and C32 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
773E, 773F, 775F, 777E, and 777F Off-Highway Truck Chassis Electronic Control System MID 087 - CID 0168 - FMI 01
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Gear Pump (Transmission)
414E Backhoe Loader Three-Point Hitch - Lubricate
C27 and C32 Engines for Caterpillar Built Machines CID 1273 FMI 14 Chassis Control Module special instruction