1100 SERIES DIESEL TRUCK ENGINE Caterpillar


Gauges

Usage:

After the engine starts, and at frequent intervals while the engine is operating, observe the gauges for proper readings.


FUEL

Indicates the level of fuel in the tank. Electrically operated, it registers only when the key switch is ON.


AMMETER

Indicates the rate of battery charge or discharge.


TACHOMETER

Indicates engine RPM. The engine can be operated between rated speed and high idle without damage, but should not be allowed to overspeed (such as when going downhill).


OIL PRESSURE

Registers between 55 and 80 PSI (50 PSI minimum) when the engine is running at rated speed with oil (SAE 30 or SAE 10W-30) at operating temperature. A lower pressure is normal at lower idling speeds. If no pressure is indicated, stop engine immediately. (Cold oil may have a higher oil pressure reading.)


WATER TEMPERATURE

Normally registers between 165° and 195°F (77° and 90°C). Somewhat higher temperatures may be experienced under certain conditions. Maximum allowable temperature, 210°F (99°C).

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.