Crankshaft Wear Sleeve
Usage:
Remove Crankshaft Wear Sleeve
1. Install the 8S7164 Wear Sleeve Puller Group and remove the wear sleeve.
REMOVING WEAR SLEEVE
Install Crankshaft Wear Sleeve
1. Place the wear sleeve between the end of the crankshaft and the pilot (2) from the 8S5135 Rear Seal Tool Group. Be sure the lead chamfer for the seal on the wear sleeve is toward the flywheel end of the crankshaft.
2. Tighten the pilot retaining bolts (1) evenly (approximately one half turn at a time). When installed, the wear sleeve will be flush with the end of the crankshaft and the pilot will be solid against the end of crankshaft.
Caterpillar Information System:
3145, 3150 & 3160 INDUSTRIAL ENGINES Crankshaft Rear Oil Seal
3145, 3150 & 3160 INDUSTRIAL ENGINES Flywheel Housing
3145, 3150 & 3160 INDUSTRIAL ENGINES Flywheel
3145, 3150 & 3160 INDUSTRIAL ENGINES Camshaft Bearings
3145, 3150 & 3160 INDUSTRIAL ENGINES Camshaft (Engines With Bolt On Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES Camshaft (Engines With Taper Drive For Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES Camshaft Gears (Engines With Bolt On Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES Camshaft Gears (Later Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES Camshaft Gears (Engines with Engine Camshaft Mounted Timing Advance and Taper Drive for Fuel Injection Pump)
3145, 3150 & 3160 INDUSTRIAL ENGINES Camshaft Gears (Earlier Engines Without Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES Camshaft Gears (Engines With Fuel Injection Pump Camshaft Mounted Timing Advance)
3145, 3150 & 3160 INDUSTRIAL ENGINES Timing Gear Cover
3145, 3150 & 3160 INDUSTRIAL ENGINES Crankshaft
3145, 3150 & 3160 INDUSTRIAL ENGINES Crankshaft Gear
3145, 3150 & 3160 INDUSTRIAL ENGINES Main Bearings
3145, 3150 & 3160 INDUSTRIAL ENGINES Engine Front Support
3145, 3150 & 3160 INDUSTRIAL ENGINES Oil Pan
3145, 3150 & 3160 INDUSTRIAL ENGINES Oil Pump
3145, 3150 & 3160 INDUSTRIAL ENGINES Oil Pump Relief Valve
3145, 3150 & 3160 INDUSTRIAL ENGINES Oil Cooler
3145, 3150 & 3160 INDUSTRIAL ENGINES Auxiliary Oil Filter Connections
3145, 3150 & 3160 INDUSTRIAL ENGINES General Information
3145, 3150 & 3160 INDUSTRIAL ENGINES Basic Block
3145, 3150 & 3160 INDUSTRIAL ENGINES Cylinder Head And Valve Components