Usage:
1. Remove camshaft bearings using the washer (1) and bolt (2) from the 1P5545 Adapter Group, in conjunction with the 8S2241 Camshaft Bearing Removal and Installation Group, and the 8H684 Ratchet Box Wrench.
2. Install the washer (1) to the end of the shaft of the removal tool group with the bolt (2).
INSTALLING WASHER
1. 1P5544 Washer. 2. S509 Bolt.
3. Install the removal tools and remove the camshaft bearings.
REMOVING CAMSHAFT BEARINGS
Install Camshaft Bearings
1. Install the camshaft bearings using the 1P5545 Adapter Group in conjunction with the 8S2241 Camshaft Bearing Removal and Installation Group, and the 8H684 Ratchet Box Wrench.
2. The 1P5545 Adapter Group pilots in the camshaft bearing and also pilots the bearing into the bore. This insures correct bearing alignment. Install bearings from chamfered side of the bores and align oil hole in bearings with oil holes in the cylinder block.
INSTALLING CAMSHAFT BEARINGS
3. To install the camshaft front bearing, it is necessary to machine a notch (5) in tube (3) for clearance of the boss that projects above the camshaft bearing bore. Machine the notch 11/2 in. (38.1 mm) wide, 3/8 in. (9.5 mm) deep, with a 1/8 in. (3.2 mm) radius or chamfer in the corners and on the edges.
NOTCH IN TUBE
3. 8S8289 Tube. 4. 8S8288 Cone. 5. Notch.
4. Invert the cone (4) and install it in tube (3) to install the camshaft front bearing.
INSTALLING CAMSHAFT FRONT BEARING
3. 8S8289 Tube. 4. 8S8288 Cone.