Oil Cooler
Usage:
Remove Oil Cooler
1. Remove coolant from engine cooling system.
2. Remove covers (3), housings (4) and oil filter elements.
3. Disconnect vent line (2).
4. Remove bolts (1) from elbow.
5. Remove bolt and clamp (7).
6. Remove bolt (5) from support bracket.
7. Disconnect water line (6).
8. Remove oil cooler.
Install Oil Cooler
1. Put oil cooler (2) in place on engine and install bolts in elbow (1).
2. Install bolt in support bracket and connect water line to front bonnet.
3. Install bolt and clamp (4).
4. Connect vent line (3).
5. Install housing, oil filter elements and cover.
6. Fill engine with coolant.
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Water Pump
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump, Accessory Drive Housing And Governor
D353 INDUSTRIAL & MARINE ENGINES Accessory Drive Housing
D353 INDUSTRIAL & MARINE ENGINES Governor (Later)
D353 INDUSTRIAL & MARINE ENGINES Governor (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Fuel Ratio Control
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing
D353 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump Adapter Housing
D353 INDUSTRIAL & MARINE ENGINES Fuel Transfer Pump
D353 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
D353 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump
D353 INDUSTRIAL & MARINE ENGINES General Instructions
D353 INDUSTRIAL & MARINE ENGINES Oil Filter Base
D353 INDUSTRIAL & MARINE ENGINES Turbocharger Lubrication Valve
D353 INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
D353 INDUSTRIAL & MARINE ENGINES Piston Cooling Tubes
D353 INDUSTRIAL & MARINE ENGINES Oil Pump
D353 INDUSTRIAL & MARINE ENGINES Oil Pan
D353 INDUSTRIAL & MARINE ENGINES Oil Pump Drive
D353 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D353 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Valves
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
D353 INDUSTRIAL & MARINE ENGINES Precombustion Chambers