PRODUCT SUPPORT PROGRAM FOR ADDING OIL STABILIZER TO REDUCE OIL CONSUMPTION DURING EXTENDED PERIODS OF IDLE ON CERTAIN 3406E,C-15, AND C-16 TRUCK ENGINES
Usage:
SEBE6388-06
January 24, 1998
(Revised January 2003)
U-26
A-24
S-11.2
O-23
TT-2
Show/hide table
After failure only |
PRODUCT SUPPORT PROGRAM FOR ADDING OIL STABILIZER TO REDUCE OIL CONSUMPTION DURING EXTENDED PERIODS OF IDLE ON CERTAIN 3406E, C-15, AND C-16 TRUCK ENGINES |
|
1215 |
PS5393
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Revised Service Letter replaces the January 24, 1998 (Revised October 2001) Service Letter. Changes have been made to the Termination Date, Affected Product, and the Action Required.
TERMINATION DATE
December 31, 2003PROBLEM
This Program has been made available to address customer complaints of oil consumption when engine idle time is approximately 25% and greater.AFFECTED PRODUCT
Show/hide table
Model | Identification Number |
3406E |
|
3406E
Reman |
|
C-15 |
|
C-16 |
|
PARTS NEEDED
2 Quarts of 1433655 Oil StabilizerACTION REQUIRED
NOTE: If the engine is eligible, on the initial visit, give the customer 2 quarts of the 1433655 Oil Stabilizer and have them add one quart at each oil change.
SERVICE CLAIM ALLOWANCES
Show/hide table
|
|
|
|
|||
|
|
|
|
|
|
|
0-1,207,500 km 0-84 mo |
|
|
|
|
|
|
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Caterpillar Information System:
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness. 0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
A New Oil Dipstick Needs To Be Installed On Certain 3412 And 3412C Engines A New Oil Dipstick Needs To Be Installed On Certain 3412 And 3412C Engines
The Priming Pump Gasket Screen May Become Obstructed On Certain 3406C And 3406E Engines Used In On-Highway Vehicle Applications The Priming Pump Gasket Screen May Become Obstructed On Certain 3406C And 3406E Engines Used In On-Highway Vehicle Applications
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CYLINDER HEADS WITH REMANUFACTURED CYLINDER HEADS ON CERTAIN 3406B AND G3406 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CYLINDER HEADS WITH REMANUFACTURED CYLINDER HEADS ON CERTAIN 3406B AND G3406 ENGINES
Product Support Program For Inspecting And Tightening Of The Generator Drive Plate Bolts On Certain Generator Sets Powered By 3306B And 3406C Engines Product Support Program For Inspecting And Tightening Of The Generator Drive Plate Bolts On Certain Generator Sets Powered By 3306B And 3406C Engines
Product Support Program For Replacing Jumper Tubes And Tuned Fittings On Certain 3116 And 3126 HEUI Truck Engines With High Pitched Squeal Product Support Program For Replacing Jumper Tubes And Tuned Fittings On Certain 3116 And 3126 HEUI Truck Engines With High Pitched Squeal
Product Support Program For Replacing The Camshaft, Front Gear Train Components, And/Or Torsional Damper On Certain 295 HP 3208 Industrial Engines Used In Ag-Chem Fertilizer Spreaders Product Support Program For Replacing The Camshaft, Front Gear Train Components, And/Or Torsional Damper On Certain 295 HP 3208 Industrial Engines Used In Ag-Chem Fertilizer Spreaders
Product Support Program For Installing A New Inlet Hose On The Raw Water Pump Of Certain 3176C And 3196 Marine Engines Product Support Program For Installing A New Inlet Hose On The Raw Water Pump Of Certain 3176C And 3196 Marine Engines
Product Support Program For Replacing The Compressor Mounting Bracket On Certain 3126 Freightliner Truck Engines Product Support Program For Replacing The Compressor Mounting Bracket On Certain 3126 Freightliner Truck Engines
Product Support Program For Repositioning The Water Temperature Sensor For The Inlet Air Heater System On Certain 3406C Truck Engines Product Support Program For Repositioning The Water Temperature Sensor For The Inlet Air Heater System On Certain 3406C Truck Engines
Product Support Program For Repairing Exhaust Leaks On Certain 3508B Marine Engines Product Support Program For Repairing Exhaust Leaks On Certain 3508B Marine Engines
Product Support Program For Replacing The Fuel Air Ratio Control Group On Certain 3208 Industrial Engines Product Support Program For Replacing The Fuel Air Ratio Control Group On Certain 3208 Industrial Engines
Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3508, 3512 And 3516 Marine Engines Product Support Program For Repairing Cracked Exhaust Manifolds On Certain 3508, 3512 And 3516 Marine Engines
Product Support Program For Installing A Generator Drive Plate Assembly On Generator Sets Powered By 3304B Engines Product Support Program For Installing A Generator Drive Plate Assembly On Generator Sets Powered By 3304B Engines
Product Support Program For Changing The Electronic Control Module (ECM) Default Settings On Certain 0R8325, 0R8520, 0R8699, And 0R8700 Remanufactured 3406E Truck Engines Product Support Program For Changing The Electronic Control Module (ECM) Default Settings On Certain 0R8325, 0R8520, 0R8699, And 0R8700 Remanufactured 3406E Truck Engines
Service Letter Cancellation Service Letter Cancellation
Product Support Program For Replacing The Outer Valve Springs On Certain 3508B, 3512B And 3516B Engines Product Support Program For Replacing The Outer Valve Springs On Certain 3508B, 3512B And 3516B Engines
Product Support Program For Providing Proper Communications Between Electronic Control Module And Emcpii On Certain 3508B, 3512B And 3516B Engine Generator Sets Product Support Program For Providing Proper Communications Between Electronic Control Module And Emcpii On Certain 3508B, 3512B And 3516B Engine Generator Sets
3S3018 Valve Springs Need To Be Removed From Parts Stock 3S3018 Valve Springs Need To Be Removed From Parts Stock
Product Support Program For Installing A New Exhaust Elbow To Prevent Exhaust Leaks On Certain 992G And T790G Wheel Loaders Product Support Program For Installing A New Exhaust Elbow To Prevent Exhaust Leaks On Certain 992G And T790G Wheel Loaders
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Inspecting And Sealing The Fan Drive On Certain 3176C Industrial Engines Product Support Program For Inspecting And Sealing The Fan Drive On Certain 3176C Industrial Engines
Product Support Program For Replacing The Exhaust Manifold On Certain G3508, G3512 And G3516 Gas Engines Product Support Program For Replacing The Exhaust Manifold On Certain G3508, G3512 And G3516 Gas Engines
Product Support Program For Inspecting And Tightening Cylinder Head Bolts On Certain C-12 Truck Engines Product Support Program For Inspecting And Tightening Cylinder Head Bolts On Certain C-12 Truck Engines