1989/09/25 Caterpillar


New Oil Level Sight Gauge Plates Used In Hydraulic And Transmission Oil Tanks{3014,5056}

Usage:


768C, 772, 772B, 776, 776B Tractors;
769C, 773B, 777, 777B, 785, 789 Trucks

Description of Change: New oil level sight gauge plates used in the hydraulic and transmission oil tanks on the machines listed above. The new oil level sight gauge plates provide clear oil level information and are consistent on all trucks and tractors. See illustrations.

Adaptable To: The three new plates 7X7801, 7X7802 and 7X7803 are direct replacements for the former 8J8543 Plate. The new plates are effective with:

768C: 02X361
769C: 01X4618
772B: 64W178
773B: 63W2525
776B: 6JC72
777B: 4YC879
785: 8GB312
789: 9ZC221

The new plates are adaptable to the following machines:

768C: 02X350-360
769C: 01X2887-4617
772B: 64W168-177
773B: 63W1221-2524
776: 14H206-Up
776B: 6JC1-71
777: 84A1284-Up
777B: 4YC1-878
785: 8GB1-311
789: 9ZC1-220


Location of oil level sight gauge plates.


Oil level sight gauge plates.

Caterpillar Information System:

1989/09/18 New Design Alternator Belt Used{1405,1406}
1989/09/18 Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18 Radio Interference With Electronic Control Systems{7338}
1989/09/18 New Retraction Plate Available As Service Replacement On Variable Displacement Piston Pumps{3203,5070}
1989/09/18 Stronger Bracket Assembly Used In Circle Groups{6150,6154}
1989/09/18 Improved Undercarriage Has Increased Wear Life{4155,4154,4175}
1989/09/11 Plasma Top Piston Rings Replace Chrome Rings{1215,1214}
1989/09/11 Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11 New Key And Pin Assembly And Axle Shaft Used In Lower Rear Drive Assembly{3259}
1989/09/11 Repair Parts And Troubleshooting Procedures For Grade And Slope Controls{5645,7220}
1989/09/11 New Setscrew For Retainer Collar At Drive Axle Bearing Assembly{3278}
1989/09/11 New Seal Retainer In Differential And Bevel Gear Groups{3280}
1989/09/25 New Engine Magnetic Pickup Assembly (Speed Sensor){3175,7450}
1989/09/25 New Cover And Tandem Groups Used{4062,4064,4071}
1989/09/25 Be Sure To Use Correct Seal In Hydraulic System Piston Pump: Correction To Parts Books{0374,5070}
1989/09/25 Baffle Used To Help Decrease Temperature In Operator's Compartment; Blower Fan Spider Assembly Available{7300,1356,1374}
1989/09/25 Procedures For Door Hinge Repair{7308}
1989/09/25 Elongated Holes In Main Frame Help Align Rotor Drive Transmission{3006}
1989/09/25 New Conveyor Hydraulic Cylinder Assembly Used; New Cup Seal Available{5102,6628,7562}
1989/09/25 Gauge Your Technical Knowledge-New Feature Covers Variety of Service Topics{0315,0110,0111,0113,5050}
1989/10/02 New Service Tools Available{0600,0700}
1989/10/02 New Brake Rod Boot Seal Assembly Used In Rear Axle Assembly{3278}
1989/10/02 Filter Element For Asphalt Spray System And Water Spray System{5615,5068}
1989/10/02 Fuel Injector Reference For 3500 Family Of Engines{1290}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.