Usage:
This machine has been designed to be a superior compaction tool for job conditions normally encountered in a wide variety of construction sites. However, the machine has operating limitations which must be recognized in order to assure operation within the capacity of the systems provided.
Braking:
This machine has been designed and tested to meet SAE braking recommendations. This machine will stop at a distance of 5.7 feet when run at a top speed of 5 1/3 mph using the propel lever in stop position for braking. Emergency braking is provided by an independent system actuated by the foot brake pedal.
| NOTICE |
|---|
This test requirement is met on hard, level, dry surfaces. Operation on other conditions such as on a slope or loose material should be taken into account by reduction of speed. |
 |
The CP-323, CS-323 has been designed with a narrow track for good trench accessibility and compaction in tight quarters. This results in a machine with operating limits which must be observed to prevent unexpected accidents or accidental injury. Suggested limits are shown below:
|
 |
