PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Caterpillar


Rotor - Plate Group

Usage:

PM825 3C6


Illustration 1g06422019

Table 1
Item  Qty  Part  Specification Description 
10  8T-4185 Bolt  Before assembly, apply blue Loctite243 threadlocker to threads.
Torque to 9.0 ± 1.5 N·m (80.0± 13.3 lb in)
8T-4195 Bolt  Before assembly, apply blue Loctite243 threadlocker to threads.
Torque to 9.0 ± 1.5 N·m (80.0± 13.3 lb in)

Caterpillar Information System:

Planet Shaft Assemblies May Be Improperly Manufactured on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160} Planet Shaft Assemblies May Be Improperly Manufactured on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160}
Procedure for Improving Battery Life is Now Available on Certain Generator Sets {1401} Procedure for Improving Battery Life is Now Available on Certain Generator Sets {1401}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Mixing Chamber
Improved Head to Block Joint on Certain C175 Reman Engines {1000} Improved Head to Block Joint on Certain C175 Reman Engines {1000}
A New Fuel Priming Pump Switch and Guard are Now Used on Certain 3512C Engines {1261} A New Fuel Priming Pump Switch and Guard are Now Used on Certain 3512C Engines {1261}
New Engine Software and Aftertreatment Software are Now Used for 797F Tier 4 Off-Highway Trucks {1920, 7620} New Engine Software and Aftertreatment Software are Now Used for 797F Tier 4 Off-Highway Trucks {1920, 7620}
Transmission Planet Gear Failure May Occur on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160} Transmission Planet Gear Failure May Occur on Certain 797, 797B, and 797F Off-Highway Trucks {3030, 3160}
High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H} High-Pressure Fuel Pump Adapter and Front Gear Inspection for Certain C175–16 and C175–20 Engines {1242, 125H}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453} Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Magnetic Switch Assembly for the Operator Arrangement May Become an Open Circuit on Certain Mini Hydraulic Excavators {1408} Magnetic Switch Assembly for the Operator Arrangement May Become an Open Circuit on Certain Mini Hydraulic Excavators {1408}
G3500 Generator Sets Maintenance Interval Schedule
Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201} Inspection of the Rear of the Engine on Certain C4.4 Machine Engines {1201}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Electronic Control Module
Procedure to Maintain Secure Start on Any Mobile Device is Now Available for Certain Excavators {7610, 7620} Procedure to Maintain Secure Start on Any Mobile Device is Now Available for Certain Excavators {7610, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Rotor Drive Group
Fuel Transfer Pump Group May Not Shut Off Automatically on Certain 320 to 330 Excavators {7610, 7620} Fuel Transfer Pump Group May Not Shut Off Automatically on Certain 320 to 330 Excavators {7610, 7620}
Unable to Perform the Bucket Zero Calibration on Certain 320, 323, 330, and 336 Excavators {7610, 7620} Unable to Perform the Bucket Zero Calibration on Certain 320, 323, 330, and 336 Excavators {7610, 7620}
A New Generator Body Stiffening Plate is Now Available for Certain 3512B Generator Sets {7002} A New Generator Body Stiffening Plate is Now Available for Certain 3512B Generator Sets {7002}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Propel Lines
Certain 330 and 336 NGH Excavators Valve/ATT Calibration May Fail Due to Pump Pressure Fluctuation {5070} Certain 330 and 336 NGH Excavators Valve/ATT Calibration May Fail Due to Pump Pressure Fluctuation {5070}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Lines (Hydraulic Fan)
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder - Lines
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Swing Cylinder Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.