- Mini Hydraulic Excavator
- 308 (S/N: GG81-UP)
- 309 (S/N: GG91-UP)
Reference: Operation and Maintenance Manual , M0090571
Introduction
A new shipping procedure is now used for the way that the listed machines are shipped from the facility. This change is made to allow for more trailer shipping options.
The stick cylinder on the boom will be sent from the facility pinned in the "Shipping Position".
Once the machine is received at the dealership, the boom cylinder pin should be changed to the "Working Position".
Problem
The stick cylinder on the boom is pinned to the stick must be changed from the shipping position to the working position. If the stick cylinder on the boom is left pinned in the shipping position, there may be interference with the work tool and the boom.
Solution
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Illustration 1 | g06331731 |
Illustration 2 | g06331729 |
Detailed view of area A Shipping position |
Illustration 3 | g06331725 |
Detailed view of area A Operating position |
For the machines listed above, a new procedure has been implemented in the Athens facility to pin the stick cylinder in the "Shipping Position". Refer to Illustration 1, Illustration 2, and Illustration 3. This new procedure will provide more shipping options.
Note: If the stick cylinder is left in the "Shipping Position", the work tool may interfere with the boom.
Refer to the Operation and Maintenance Manual for further information on the stick cylinder working position.