Pump Drive Coupling - Remove and Install
Start By:
- Remove the main hydraulic pump.
- Loosen set screws (1) and remove a part of pump drive coupling (2) from the main hydraulic pump.
Show/hide table
Illustration 2 g06318429 - Remove bolts (3) and other half of pump drive coupling (2) from the flywheel.
Show/hide table
Illustration 3 g06318431 - Remove spring pins (4).
Show/hide table
| |
| Illustration 1 | g06318425 |
- Install pump drive coupling (2) in the reverse order of removal.
- Tighten bolts (3) to a torque of
320 ± 10 N·m (236 ± 7 lb ft) . - Tighten setscrews (1) to a torque of
110 ± 10 N·m (81 ± 7 lb ft) .
- Tighten bolts (3) to a torque of
Caterpillar Information System:
C18 Generator set and C18 Marine Engines Fuel Manifold - Install
C175-16 Marine Engines Oil Mist Detector - Clean
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Crankshaft Front Seal - Remove and Install
320D3 Hydraulic Excavator Machine Systems Monitor - Remove and Install - Machine
C18 Generator set and C18 Marine Engines Fuel Manifold - Remove
320D3 and 323D3 Excavators Systems Pump Control (Main Hydraulic) - Main Pump Regulator
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Boom/Stick/Bucket Combinations
The Brake Cooling and Brake Charging Pump May Lose Efficiency Prematurely on Certain 777G Off-Highway Trucks {5073} The Brake Cooling and Brake Charging Pump May Lose Efficiency Prematurely on Certain 777G Off-Highway Trucks {5073}
797F Tier 4 Off-Highway Truck Engine Supplement Nitrogen Oxide Sensor (Exhaust Inlet) - Remove and Install
The Hydraulic Tank is Improved on Certain 797F Off-Highway Trucks {5056} The Hydraulic Tank is Improved on Certain 797F Off-Highway Trucks {5056}
C18 Generator set and C18 Marine Engines Fuel Filter Base - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Quick Coupler Operation - If Equipped
PM820, PM822, and PM825 Cold Planer Conveyor Belt Tension and Tracking - Adjust
320D3 Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Remove - Remote Mount
797F Tier 4 Off-Highway Truck Engine Supplement Temperature Sensor (Exhaust Inlet) - Remove and Install
New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400} New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400}
Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269} Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403}
A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274} A New Fuel Return Tube Assembly and Mounting Hardware is Now Used on Certain C9.3 Marine Engines {1274}
320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Remove
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Install - Remote Mount
320D3 Hydraulic Excavator Machine Systems Bucket Linkage Bearings and Seals - Install