Monitor - Remove and Install - Machine
- Disconnect harness assembly (3).
- Remove bolts (1) and monitor (2).
Show/hide table
Illustration 1 | g06318337 |
- Install the monitor in the reverse order of removal.
Caterpillar Information System:
C18 Generator set and C18 Marine Engines Fuel Manifold - Remove
320D3 and 323D3 Excavators Systems Pump Control (Main Hydraulic) - Main Pump Regulator
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Boom/Stick/Bucket Combinations
The Brake Cooling and Brake Charging Pump May Lose Efficiency Prematurely on Certain 777G Off-Highway Trucks {5073} The Brake Cooling and Brake Charging Pump May Lose Efficiency Prematurely on Certain 777G Off-Highway Trucks {5073}
797F Tier 4 Off-Highway Truck Engine Supplement Nitrogen Oxide Sensor (Exhaust Inlet) - Remove and Install
The Hydraulic Tank is Improved on Certain 797F Off-Highway Trucks {5056} The Hydraulic Tank is Improved on Certain 797F Off-Highway Trucks {5056}
C18 Generator set and C18 Marine Engines Fuel Filter Base - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Quick Coupler Operation - If Equipped
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418} Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
C175 Tier 4 Final Engines for Caterpillar Built Machines Water Pump - Assemble
797F Tier 4 Off-Highway Truck Engine Supplement Nitrogen Oxide Sensor (Exhaust Outlet) - Remove and Install
320D3 Hydraulic Excavator Machine Systems Swivel - Assemble
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Crankshaft Front Seal - Remove and Install
C175-16 Marine Engines Oil Mist Detector - Clean
C18 Generator set and C18 Marine Engines Fuel Manifold - Install
320D3 Hydraulic Excavator Machine Systems Pump Drive Coupling - Remove and Install
PM820, PM822, and PM825 Cold Planer Conveyor Belt Tension and Tracking - Adjust
320D3 Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
C18 Generator set and C18 Marine Engines Engine Oil Filter Base - Remove - Remote Mount
797F Tier 4 Off-Highway Truck Engine Supplement Temperature Sensor (Exhaust Inlet) - Remove and Install
New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400} New Non-Contact Switch is Now Used on Certain 3500Engines {1078, 1408, 5736, 7400}
Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269} Outboard Bearing Removal Procedure for Integrated Throttle Body (ITB) on Certain 3500 Engines {1269}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Machine Engines {1403}
A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403} A New Engine Wiring Harness is Now Used for Certain C15 and C18 Tier 4 Final Engines {1403}