Flywheel Housing
Show/hide table
| |
| Illustration 1 | g00820369 |
(1) Back plate
(2) Flywheel housing
(3) Tighten the setscrews for the back plate to the following torque.
- C0.5 and C0.7 ...
15 N·m (133 lb in)
(4) Crankshaft rear seal
(5) Tighten the setscrews for the flywheel housing to the following torque.
- C0.5 and C0.7 ...
15 N·m (133 lb in)
Caterpillar Information System:
C0.5 and C0.7 Industrial Engines Piston and Rings
745 and 740 GC & 740 EJECTOR Articulated Truck Systems Electronic Control Module
C0.5 and C0.7 Industrial Engines Connecting Rod
C0.5 and C0.7 Industrial Engines Camshaft
G3516 TA Engine Oxygen Level - Test
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466} Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Glossary
3500E Marine Engines Magnetic Switch
3500E Marine Engines Switches
New Turbocharger Troubleshooting for Certain C7 and C9 Truck Engines {0374, 1052, 107F} New Turbocharger Troubleshooting for Certain C7 and C9 Truck Engines {0374, 1052, 107F}
C0.5 and C0.7 Industrial Engines Crankshaft
C0.5 and C0.7 Industrial Engines Connecting Rod Bearing Journal
C0.5 and C0.7 Industrial Engines Exhaust Manifold
C0.5 and C0.7 Industrial Engines Engine Oil Lines
C0.5 and C0.7 Industrial Engines Speed Sensor - If equipped
C0.5 and C0.7 Industrial Engines Atmospheric Pressure Sensor - If equipped
C0.5 and C0.7 Industrial Engines Governor Control - Actuator
789D, 793F, and 797F Off-Highway Truck Monitoring System General Information
3516B Generator Set Engines with Dynamic Gas Blending Restriction of Air Inlet and Exhaust
789D, 793F, and 797F Off-Highway Truck Monitoring System Menus (Advisor)
G3516 Petroleum Engines Aftercooler - Remove and Install
SCR Retrofit Aftertreatment Diesel Particulate Filter - Clean/Inspect
C0.5 and C0.7 Industrial Engines Cooling System
C0.5 and C0.7 Industrial Engines Basic Engine