New Crankshaft Seals Are Now Used on Certain 3524 Engines {1000, 7555}
- Industrial Engine
- 3524B (S/N: NPM1-UP)
Description Of Change: The new crankshaft seals have triple spiral groove and a non-contact auxiliary/dust lip.
Adaptable To: The new 436-1478 Crankshaft Seal Front replaces the former 197-3889 Crankshaft Seal Gp Front.
The new 436-1479 Crankshaft Seal Rear replaces the former 175-5290 Crankshaft Seal Gp Rear.
The new crankshaft seals are adaptable to the above engines back to first production.
This change is effective for the serial numbers S/N:NPM00492-UP.
Show/hide table
Illustration 1 | g06005436 |
3524 engine (1) 3512 rear engine (2) 3512 front engine (3) 436-1478 Crankshaft Seal Front (4) 436-1479 Crankshaft Seal Rear (5) 155-0423 Crankshaft Seal Gp Rear |
Note: Crankshaft seal (5) on the rear engine was previously released and announced to the field.
Caterpillar Information System:
C1.7 and C2.2 Industrial Engine Motorized Valve - Test
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180} Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
C1.7 and C2.2 Industrial Engines Fuel Filter Base - Secondary Fuel Filter Base
C1.7 and C2.2 Industrial Engine Electrical Power Supply - Test
312F and 313F Excavator Machine System Specifications Liquid Level Sensor (Water Separator)
New Software Is Available for Certain 3516C Petroleum Engines {1901, 1920, 7620} New Software Is Available for Certain 3516C Petroleum Engines {1901, 1920, 7620}
A New Fuel Injector Bypass Group Is Now Used on Certain C175 Commercial Engines {1274, 1702} A New Fuel Injector Bypass Group Is Now Used on Certain C175 Commercial Engines {1274, 1702}
A New Cylinder Pack Assembly Is Now Available For Certain 3500 Locomotive Engines {1239} A New Cylinder Pack Assembly Is Now Available For Certain 3500 Locomotive Engines {1239}
Quick Coupler (Dedicated Wedge Lock) Quick Coupler - Lubricate
3516E Generator Set Engines Connecting Rod and Main Bearing Journals
C175-16 Locomotive Engine Fuel Filter Is Restricted
C1.7 and C2.2 Industrial Engine CAN Data Link - Test
Installing Inducement Override Switch and Wiring for 3516C & C175-16 Tier 4I Engines That Uses an EMCP 4.2 Panel {1408, 7405, 7451, 7553, 7556} Installing Inducement Override Switch and Wiring for 3516C & C175-16 Tier 4I Engines That Uses an EMCP 4.2 Panel {1408, 7405, 7451, 7553, 7556}
C12.9 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
C1.7 and C2.2 Industrial Engine Relay - Test - Start Relay
C11 and C13 Petroleum Engines Gear Group (Rear) - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Gear Group (Rear) - Remove and Install
Cat® Command For Hauling E1189
New 441-4414 Exhaust Manifold Is Available for Use on Certain G3520C Landfill Engines {1059} New 441-4414 Exhaust Manifold Is Available for Use on Certain G3520C Landfill Engines {1059}
New O-Ring Seal Kit Is Available for Use on Raptor Fuel Valve Sensor Module {1741, 5137} New O-Ring Seal Kit Is Available for Use on Raptor Fuel Valve Sensor Module {1741, 5137}
A New Caterpillar Regeneration System (CRS) Pump Is Now Used For Certain Tier 4 Final Engines {1258} A New Caterpillar Regeneration System (CRS) Pump Is Now Used For Certain Tier 4 Final Engines {1258}
C12.9 Marine Engines Starting Aid (Air Inlet Heater) - Inspect/Clean/Replace
C18 Generator Set Engines Fuel Priming Pump - Remove and Install
C12.9 Marine Engines Sensors and Electrical Components