Alarms and Shutoffs
切断装置和警报器是两种类型中的一种:
- 电气
- 机械
所有电动切断装置和所有电子警报器通过传感装置内促动开关的部件来工作。
切断装置被设定在以下各项的临界水平上:
- 工作温度
- 工作压力
- 工作液位
- 工作转速
起动发动机之前,某个具体的切断装置可能需要复位。
Show/hide table
注意 |
---|
一定要确定导致发动机停机的原因。 在试图重新起动发动机之前,要进行必要的修理。 |
确保熟悉下列内容:
- 切断装置的类型和位置
- 导致每个切断装置起作用的条件
- 发动机重新起动的复位程序
发动机可能配备有各种警报器,以便在发生不利的运行情况时提醒操作员。
Show/hide table
注意 |
---|
某一警报被触发后,在情况变得紧急之前就必须采取纠正措施,以免可能对发动机造成损害。 |
一旦警报器启动,必须在合理的时间内采取正确措施,否则会导致发动机的损坏。 警报一直持续到报警条件得到纠正。 报警器可能需要重置。
可能在警报器内安装了消声开关。 可以在停止发动机进行修理时安装此开关。 起动发动机前,检查有无此开关。 确保将开关转到接通位置且警告灯在闪烁。 如果开关仍处在断开位置,发动机将得不到保护。
大多数控制仪表板上装有一个试灯开关。 把开关转到 “接通”(ON)位置,以检查指示灯是否正常工作。 立即更换坏掉的灯泡。
Show/hide table
注意 |
---|
测试时,必须模拟不正常的工作条件。 正确地进行测试,这有助于防止损坏发动机。 |
有关测试程序的更多信息,请参阅维修手册或咨询 Caterpillar 代理商。
Caterpillar Information System:
G3600 A4 Engines Engine Support
C9.3 Marine Auxiliary and Generator Set Engine Diagnostic Capabilities
G3600 A4 Engines Engine Support
G3600 A4 Engines Engine Support
G3600 A4 Engines Crankcase Breather
G3600 A4 Engines Aftercooler
G3600 A4 Engines Air Starting Motor Pressure Regulating Valve
C7.1 Marine Generator Set Cleanliness of Fuel System Components
G3600 A4 Engines Air Starting Motor Pressure Regulating Valve
G3600 A4 Engines Camshaft
G3600 A4 Engines Piston and Rings
G3600 A4 Engines Manual Barring Group
C18 Marine Generator Set Coolant - Change
C18 Marine Generator Set Reference Information
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Flow Is High
C18 Marine Generator Set Coolant Sample (Level 1) - Obtain
C18 Marine Generator Set Coolant Sample (Level 2) - Obtain
G3612 and G3616 Engines Ignition Wiring Harness - Remove and Install
Some 3508 Crankshafts May Be Manufactured with Trimmed Counterweight Ears{1202, 1231} Some 3508 Crankshafts May Be Manufactured with Trimmed Counterweight Ears{1202, 1231}
2015/04/10 Preventing Memory File Corruption on the Engine Control Module (ECM) of Certain Truck Engines {1901}
C18 Marine Generator Set Engine Protective Devices - Check
G3600 A4 Engines Crankshaft
G3600 A4 Engines Cylinder Block
G3600 A4 Engines Valve Mechanism