G3600 A4 Engines Caterpillar


Manual Barring Group

Usage:

G3612 BB2


Illustration 1g03819721
Top view

Table 1
Specification for 419-4328 Barring and Mounting Gp 
Item  Qty  Part  Specification Description 
5L-1091 Spring  Length under test force is 15.88 mm (0.625 inch)
Test force is 4.14 N (0.93 lb).
Free length after test is 19.05 mm (0.750 inch).
5P-8215 O-Ring Seal  Before assembly, lightly lubricate the bore with fluid that is being sealed. 


Illustration 2g03819722
Front view

Table 2
Item  Qty  Part  Specification Description 
Lock the shaft of the manual barring group and gear (5) in the disengaged position. The disengaged position is achieved when the operating stem (4) is engaged in the slot of the shaft of the manual barring group. Add 1P-0808 Multipurpose Grease until the grease is visible at the vent hole for the lubricant (6). 
9Y-4709 Spring  Length under test force is 65.75 mm (2.589 inch)
Test force is 77 N (17 lb).
Free length after test is 83.67 ± 0.50 mm (3.294 ± 0.020 inch).


Illustration 3g03819723
(3) Bracket assembly

Table 3
Item  Qty  Part  Specification Description 
6V-3538 Dowel  Extension is 8.00 ± 1.00 mm (0.315 ± 0.039 inch)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.