G3600 A4 Engines Caterpillar


Camshaft

Usage:

G3612 BB2


Illustration 1g03819734

Table 1
Specification for 383-1777 Camshaft Gp 
Item  Qty  Part  Specification Description 
7W-0592 Thrust Plate  Thickness is 15.00 ± 0.25 mm (0.591 ± 0.010 inch)
Diameter of bearing journals in a new journal camshaft assembly is 173.80 ± 0.03 mm (6.843 ± 0.001 inch)
9X-6380 Bolt  Torque to 270 ± 40 N·m (199 ± 30 lb ft)
7W-0855 Bolt  Before assembly, apply Loctite C5A Copper Anti-Seize to threads. 


Illustration 2g03819735
View of area C

Table 2
Item  Qty  Part  Specification Description 
6V-3538 Dowel  Extension of the dowel is 7.00 ± 0.50 mm (0.276 ± 0.020 inch)


Illustration 3g03819736

Table 3
Item  Qty  Part  Specification Description 
Use the following procedure in order to determine the camshaft lobe lift: 
1. Measure camshaft lobe height (F).
2. Measure base circle (G).
3. Subtract the base circle (G) from the camshaft lobe height (F). The difference is the actual camshaft lobe lift.
Specified camshaft lobe lift: 
Inlet lobe is 16.100 mm (0.6338 inch).
Exhaust lobe is 19.500 mm (0.7677 inch).
Gas admission lobe is 10.000 mm (0.3937 inch).
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.