Maintenance Interval Schedule
Note: All safety information, warnings, and instructions must be read and understood before you perform any operation or any maintenance procedure.
Transmission Oil - Change
Transmission Suction Screen - Clean
When the maintenance procedures for a specific maintenance interval are performed, all of the maintenance procedures from the previous maintenance intervals must also be performed.
When Required
Breather (Transmission) - CleanEvery 10 Service Hours or Daily
Transmission Oil Level - CheckInitial 250 Service Hours
Oil Filter (Transmission) - ReplaceEvery 250 Service Hours
Transmission Oil Sample - ObtainEvery 1000 Service Hours
Oil Filter (Transmission) - ReplaceTransmission Oil - Change
Transmission Suction Screen - Clean
Caterpillar Information System:
G3520H Generator Set Engine Water Temperature Regulators - Remove and Install
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261} 20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
794 AC Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Remove and Install
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor Positioned in Original Equipment Manufacture (OEM) Exhaust Tube Assembly
C3.4B Engines Sensor (Data Link Type) - Test - Ammonia Sensor
352F Excavator Plate Locations and Film Locations
DE Series Generator Set With Cat C7.1 Engine Refill Capacities and Recommendations
DE Series Generator Set With Cat C7.1 Engine Model View Illustrations
DE Series Generator Set With Cat C7.1 Engine Safety Messages
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Air Shutoff - Test
Engine System Setup for Certified CG137-12 Generator Set Engines {1270, 1278} Engine System Setup for Certified CG137-12 Generator Set Engines {1270, 1278}
2014/10/03 Cat® Reman Announces Additional C7 Engine Options for Certain Thomas Built Bus Applications {1000, 1201}
2014/10/03 Cat® Reman Now Offers Upgrade to New Cylinder Heads for Certain Engines {1100}
C7 and C9 Industrial Engines ECM - Replace
794 AC Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Disassemble
794 AC Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Assemble
C7 and C9 Industrial Engines Oil Pressure Is Low
C7 and C9 Industrial Engines Oil Temperature Is High
C7 and C9 Industrial Engines Injection Actuation Pressure Control Valve - Test
3500B Generator Sets Maintenance Interval Schedule - Prime
3500B Generator Sets Maintenance Interval Schedule - Standby
G3520H Generator Set Engine Water Pump - Remove and Install
C7 and C9 Industrial Engines Injector Solenoid - Test
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Armrest